Maintenance Work for Saw Dust Pellet Machine
Maintenance work for saw dust pellet machine is very important, since it can increase the output of pellets and prolong service life of key parts. How to make the maintenance work? Actually, maintenance work is nothing more than the frequent check or change of worn-out parts. It is not tired, but some tedious. For most users of saw dust pellet machine, they are not likely to do the maintenance work. saw dust pellet machine Actually, scientific maintenance can improve the performance of saw dust pellet machine and increase the output of pellets. As long as you can take a little of time, you will see the fruitful effects. At present, most enterprises choose to take the traditional way to make pellets. Compared with the current pelletizing way, way that Fote adopts to make pellets is more excellent. Materials to be pelletized are fed into the inner space of ring die and pressed by the press rollers. After being pressed, raw materials can become the biomass pellets with even size and desirable shape. Working way of sawdust pellet mill includes the parts of drying, pressing, cooling and packaging. To finish the above parts, you have to bear the great consumption of energy. During the working process, pressure in sawdust pellet mill can reach to the point that changes from 50MPa to 100MPa. Under the strong pressure, raw materials are transformed and heated. Working temperature can change from 100℃ to 120℃. Since all the above parts are driven by the dynamos, you have to bear the great consumption of electrical energy. Fote Heavy Machinery: Fote Official Email:
在线联系供应商
Other supplier products
 |
Technical Advantages of FTM Hammer Crusher | Different crushers have different technical advantages. Compared with other crushers, hammer crusher machine is more obvious in the following techn... |
 |
Briquetting Plant/Large Briquetting Plant | Introduction to Large Briquetting Plant Major equipments: compound crusher, feeder, horizontal mixer, briquetting machine and dryer. Briquettes pla... |
 |
Do You Know the Heating System of Three-drum Dryer? | Being heated by the coal fuel and other sources, the three-drum dryer can evenly and perfectly transfer heat to raw materials. Then, the following ... |
 |
Frequent Checks for the Coal Briquetting Machine | It is necessary to make daily maintenance and checks for the coal briquette plant. As to the maintenance work, you’d better refer to the inst... |
 |
Solutions to Low Balling of Coal Briquette Machine | Coal briquette machine can be widely used for many industries. Coal briquetting plant may have some failures during the working process. How to sol... |
Same products
 |
PV System | 卖方: Sunrise Energy Co., Ltd | PV SYSTEMS On Grid PV system Self-generation, surplus power online, monthly income from elect... |
 |
Special Shape LCD TFT Display Module | 卖方: Shenzhen EXSON Technology CO.,LTD | Special shape LCD displays have become more and more popular in home appliances, Smart Metering e... |
 |
推台锯S350 | 卖方: 青岛联合晟达国际贸易有限公司 | 型号：S350主刀直径：350*30mm主刀转速：4000rpm划线刀直径：120*20mm划线刀速度：8000mm最大切削深度 45°：92mm最大切削深度 90° ：120m... |
 |
推台锯 S315 | 卖方: 青岛联合晟达国际贸易有限公司 | 型号:S350主刀直径:350*30mm主刀片转速:4000rpm划线刀直径:120*20mm划线刀速度:8000mm最大切削深度 45°:92mm最大切削深度 90°:120m... |
 |
刨角机 MS-60 | 卖方: 青岛联合晟达国际贸易有限公司 | 电源功率：220/50HZzmm 电机转速（最大）：31000r/min 加工高度（最大）：60mm Comer刀具标准：双面铣刀1/4 1/6 电机功率：0.44kw 总尺寸：600... |
