.

HF(RF) Vacuum Timber Dryer

HF(RF) Vacuum Timber Dryer

It is suitable for efficiency eliminating the stress of timber (especially secondary drying and balancing of timber), quick drying of large cross section thick timber

Safe Vacuum Timber DryerProduct Description

It is suitable for efficiency eliminating the stress of timber (especially secondary drying and balancing of timber), quick drying of large cross section thick timber, quick drying of hard timber ( especial redwood ), quick drying of small batches of timber, drying of floor and surface plate, drying of single plates, etc.

Features:

Adopts High frequency drying technology, inside and outside of wood timber is heated at the same time, uniform heating, high speed drying, short drying time and good quality. Which can keep the timber nature color, meanwhile, the timber is aerated under the vacuum environment, non-cracking,especially applied for the thick and hard wood, or secondary drying for wood.

The timber is vaporized at low temperature in vacuum environment and is not easily deformed and cracked.

CNHFVacuum Timber Dryercan also dry blank for solid wood flooring, the veneer flatness is good and operation is simple.

Timber stress can be effictively eliminated and timber moisture content can be balanced.

It is eco-friendly and safe and does not require a boiler.

Typical drying parameters: The dry thickness of hard timber ( red timber ) is 6cm, it only takes 6 days to dry rosewood with moisture of 35%-50% to 11%-13% and secondary balanced drying of timber can be performed ( only taking several hours ).

The overall tank body is made of 304 stainless steel, all pipelines are made of 304 stainless steel, resistant to rust to protect klin body and pipelines from regular anticorrosion maintenance and pollution of timber.

Type

CGGZ-3

CGGZ-4.5

CGGZ-6

CGGZ-8

CGGZ-10

CGGZ-12

CGGZ-14

CGGZ-20

The effective packing material size (m)(H)×(W)×(H)

1×1×3

1×1×4.5

1×1×6

1×1×8

1×1×10

1×1×12

1×1×14

1×1×20

Effective volume (m³)

3

6

8

10

12

14

20

HF power (kW)

30

30

60

80

80

80

80

100

Human-machine interface

Touch scteen operation Automatic

Vacuum degree (Mpa)

-0.07~-0.09

If you want to know more related products, please clickhere.



在线联系供应商

至: Shijiazhuang Cangao High Frequency Machinery Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Four Angles Nailing Joining Machine For Wooden Frame
Four Angles Nailing Joining Machine For Wooden Frame For Wooden Frame It is applied for joining four angles of wooden frame at a time. Each angle can simultaneously be used for single nail, and also f...
HF(RF) Machine Specialized For The Guitar
HF(RF) Machine Specialized For The Guitar HF(RF)Machine Specialized For The Guitar High Frequency Board Joining Machine For The Sound-pot Of Electric Guitar (Finger Board Pressing Machine)...
HF(RF) Wooden Angle Joining Machine with Nailing
HF(RF) Wooden Angle Joining Machine with Nailing HF(RF)with Nailing CGDJ-5C: After high frequency joining the angle, it automatically nail(1 or 2pcs) on the back of the door buckle line. Higher co...
KN95 Face Mask Making Machine
KN95 Face Mask Making Machine KN95 (N95)Face Mask Making Machine CNHF Face Mask Making MachineMain Technical Specification Type Power 3KW Weight 1500KG Control Scheme P...
HF(RF) Hot Press Machine For Wood Bengding & Forming
HF(RF) Hot Press Machine For Wood Bengding & Forming This machine sells to Italy, Egypt, Russia, Canada, Argentina, Turkey, Bengal, Indonesia, India, Malaysia. The high frequency hot press machine se...
供应产品

Same products

推台锯
推台锯 卖方: QINGDAO UNITED ASIA INDUSTRY CO.,LTD. Dimension of sliding table 3200*415mm Gross cut capacity 3200mm Width of cut between saw blade an...
automatic square wood multi blade saw
automatic square wood multi blade saw 卖方: Foshan Nanhai Zhengqi Machinery Factory 1. Zq100-zq150 automatic square wood multi blade saw adopts independent 5 roller drive design, wh...
雕刻机 ST1224
雕刻机 ST1224 卖方: 济南众木智能科技有限公司 ◘工作面积1200*2400*100mm ◘铸造台面焊接床身 ◘主轴2.2KW水冷 ◘龙门移动
雕刻机 ST1212
雕刻机 ST1212 卖方: 济南众木智能科技有限公司 ◘工作面积1200*1200*100mm ◘铸造台面焊接床身 ◘主轴2.2KW水冷 ◘龙门移动
激光机1325P
激光机1325P 卖方: 济南众木智能科技有限公司 *工作尺寸1300 * 2500mm * RECI W6激光管(130-150W) * Leadshine步进电机和驱动器 *国产15方轨* CW5200冷水机