Night vision housing S-SD8-W
Please strictly follow the below instructions when install this product!1. Description• Accurate constant circuit drive develops excellent performance of LED; Using high power LED, high efficacy and long service life; • Fill light for night vision camera • Indoor/outdoor use• Easy installation2. SpecificationQuantity of LED8PCS 2W High Power LEDColor TemperatureCool white, warm whiteLuminous Flux800lmBeam angle15°- 90°Viewing Distance80m-10mDay/night switchCDS 10-20lux ±10%Working VoltageAutoPower consumption14WWireIf 12VDC/24VAC:45cm(1.4 ft.)OutputDC13.5V 1APlugAC110-220Vstandard), other voltage optionalPanelTempered glass panelHousingAluminum Die Casting HousingBracketMount bracketWorking temperatures-20℃ to +50℃(-50℃ to +50℃ with heater)Protection LevelIP65ColorBlackN.W2.6KGG.W3.25KGPacking dimension440*270*220mmBracket (options)Material: Aluminium AlloySize: 360*90*90mmN.W./G.W.: 0.4kg/0.7kg3. Installation1. The product includes fragile parts. Take care on every transportation steps and hold carefully, do not stress!2. Ensure operating voltage and current are proper before installation.3. Install the product on the holder by fixing the mount hold with screws directly. 4. Adjust the angle of product by loosing screws on bracket. 5. Link power wires tightly and make it waterproof to avoid electric shock.6. Connect with extra power wire should make it waterproof at the same. 7. The outlet of power wire should be installed downward.8. Don't use against any fire precaution rules during operation. 9. Installation requested professional operation and qualified personnel.10. Connect our sales person if you need additional parts for installation.Maintenance 1. Cut off power before maintenance.2. Clean the glass regular to get better transmission of light. 3. Clean the housing to get well heat dissipation performance. 4. Clean by dry dishcloth, don't use water or strong corrosive solution.Night vision picturesNight time with white lightNight time without white light4. Installation and adjustment(1). Internal PicturePut on the camera on the telescoping bracket, adjust the height of camera and fix it.(2). Wires①BNC Video Signal Wire: Connect to the video signal wire of camera② Power Wire: Connect to the power of camera③ BNC Video Signal Wire: Connect to the monitor.④ Power Plug: Connect to power source.(3). Dimension of inside camera(4). Adjustment①Adjust the current of LED PCB, increase current by turn clockwise and decrease by counter clockwise. Increase the current, the power of LED will increase too.② Turn counter clockwise to increase the sensitive of CDR sensor.5. Dimension6. Models for selectionModelBeam AngleWhite Light DistanceS-SD8-15-W15°80mS-SD8-30-W30°60mS-SD8-45-W45°40mS-SD8-60-W60°25mS-SD8-90-W90°10m* White light distance is tested by SONY 1/3" CCD Camera. To achieve the distance needed, please pay attention to your camera specification and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens.Our product is weatherproof and dustproof. Do not modify the shape, dismantle or reconfigure the product, any inflow of water cause by which are not be responsible for warranty repair.
Other supplier products
|
|
|
LED Illuminator for Red Light EnforcementSZN3103-W LED Strobe LightProduct OverviewSZN-3103-W Digital LED Strobe Light is a high power and smart pe... |
|
|
|
Product OverviewScene's Digital LED Strobe Light is high power and smart performance digital pulse strobe light for Intelligent Traffic System appl... |
|
|
|
Please strictly follow the below instructions when install this product!1. Description• Accurate constant circuit drive develops excellent performa... |
|
|
|
S-SA6-IR IR IlluminatorDeliver high power white light for CCTV & IP camera at night time and improve performance of camera to get clear pictures.Pr... |
|
|
|
Touch Control LED IlluminatorS-SE20T-WQuantity of LED: 20PCSPower Consumption: 30WWorking Voltage: AC100-240V (Universal)Viewing Distance: 1m-100mO... |
供应产品
Same products
