Fiber Optic Patch Cord
What is Fiber Optic Patch cord
Fiber patch cords / pigtails are one of the most widely used basic components in optical communications. A fiber cable with a connector at both ends is called a jumper and only one connector at one end is called a pigtail.
They are passive components for realizing the active connection of different devices and systems in optical fiber communication, and are an important part of optical fiber and optical cable wiring management systems. It is used in conjunction with the fiber distribution frame, the junction box, and the terminal box to achieve the fusion of the optical cables in different directions. The flexible distribution of jumpers and wiring enables efficient and flexible management and maintenance of the entire fiber-optic communication network.
Fiber patch cords are used to make patch cords from the device to the fiber optic cabling link. It is with a thicker protective layer of Kevlar yarn and PVC or LSZH. Fiber Patch cord is generally used in the connection between the optical transceiver and the terminal box.
Optical fibers are mainly divided into two categories:
Single-mode fiber: Generally, the fiber jumper is indicated by yellow, the connector and the cover are blue, and the transmission distance is long.
Multi-mode fiber: Generally, the fiber jumper is indicated by orange, and some are indicated by gray. The connector and cover are made of beige and the transmission distance is short.
Application notice of fiber optical patch cord
The wavelength of the optical transceivers at both ends of the optical fiber jumper must be the same. The simple method to distinguish the transceiver is according to the module’s color. In general, short-wavelength optical modules connect to multimode fiber (orange fiber), and long-wavelength optical modules connect to single-mode fiber (yellow fiber) to ensure data transmission accuracy.Do not bend or wrap the fiber in use, which will increase the attenuation of light during transmission. After the fiber jumper is used, the fiber connector must be protected with a protective cover. Dust and oil can damage the coupling of the fiber.
What are the representatives for FCSTSCLCMTRJ and PCAPCUPC in the fiber jumper?
FC, ST, SC, LC, and MTRJ are different physical interface connections.
FC is a circular spiral mouth.
ST is a round 45 degree bayonet.
SC is a square socket.
LC and MTRJ are small ferrule connectors, which are used less in the country, but are used on some imported equipment.
PC, APC, and UPC represent the front end structure of the ceramic ferrule!
The PC is a spherical structure, the APC is an oblique 8 degree angle structure, and the UPC is a hyperplanar structure.
Introduction to armored fiber jumpers?
The design concept of armored fiber patch cords is dedicated to that the patch cords are as easy to use as wire cable. The biggest difference between it and the traditional fiber optic patch cord is that it is designed to produce a small flexible stainless steel sleeve to protect the fiber, which is not easy to break and easy to be damaged. Good resistance to bending, repeated bending, and rat biting. The flame-retardant PVC coating is added to the casing to achieve moisture-proof and fireproof functions. This supple and sturdy dual protection really makes the information unobstructed. In addition, the unique design makes the construction of the fiber optic cable easier, reduces the loss during construction, and improves the life of the fiber optic connector.
UnitekFiber Solution is a professional patch cord manufacturer. Just contact us!
在线联系供应商
Other supplier products
 |
ADSS Fiber Optic Cable | Introduction of ADSS Fiber Optical Cable ADSS cable, All-dielectric Self-supporting Optical Cable (also known as All-dielectric self-supporting fib... |
 |
Fiber Optic | Fiber optics, or optical fibers, are long, thin strands of carefully drawn glass about the diameter of a human hair. These strands are arranged in ... |
 |
FTTH Drop Fiber Optic Cable | We are specialized manufacturer in China supply high-quality products of FTTH Drop Cable, Flat FTTH Drop Cable and Self-support indoor outdoor FTTH... |
 |
LC 12 Colorful Bulk Pigtails Single Mode Multi Mode Corning Fiber | Descriptionof the LC pigtail single mode: UnitekFiber provides Corning 12 colorful bulk fiber pigtails. The fiber pigtail is ususally using 0.9mm f... |
 |
19 2U Rack Mount Fiber ODF Optical Distribution Frame / Patch Panel 48 Port loaded with SC duplex Adapter | Description UnitekFiber is manufacturing 2U fiber optic Fixed ODF frame. Our ODF frame can be loaded with FC,SC,ST,LC adapters and pigtails. The o... |
Same products
 |
Machine Vision Controller | 卖方: FUZHOU GREEN AXE INTELLIGENT MANUFACTURING TECHNOLOGY CO.,LTD | Machine Vision Controller Machine Vision Controller A is a critical component in automate... |
 |
Machine Vision Solutions | 卖方: FUZHOU GREEN AXE INTELLIGENT MANUFACTURING TECHNOLOGY CO.,LTD | Machine Vision Solutions Machine Vision Solutions In today’s era of smart manufactu... |
 |
Camera For Visual Inspection | 卖方: FUZHOU GREEN AXE INTELLIGENT MANUFACTURING TECHNOLOGY CO.,LTD | Camera For Visual Inspection Camera for Visual Inspection In modern manufacturing and qua... |
 |
Wylie Rear Camera Test Flex Cable for iPhone X-12 Pro Max | 卖方: Phonefix | Wylie rear back camera test extension flex cable for iPhone X-12 Pro Max. Wylie iPhone rear camer... |
 |
JCID Non-Removal Front CaJCID Non-Removal Front Camera Tag-on Repair Flex Cable for iPhone 14-15 pro maxmera Tag-on Repair Flex Cable for iPhone 14-15 pro max | 卖方: Phonefix | JCID Non-Removal Front Camera Tag-on Repair Flex Cable for iPhone 14-15 pro max. JCID 14-15 Serie... |
