Optical Dome
Optical domesare widely used for commercial applications which require protective boundary between different environments; domes perform as windows, providing protection to electronic sensors or detectors without sacrificing field of view.
Composed of two parallel optical surfaces, domes have no optical effect on design optical path. In lead element in an optical system, a dome is exposed to the environment, BK7 glass transmissionis good choice for visible to near infrared lead applications, which will withstand wind and rain erosion. Typically in single-use defense applications and ocean exploration. Shapes can vary from hemispheric to custom size with coatings.
At Hyperion Optics, as one of the glass dome manufacturers, we have strict control of wall thickness variation spec by utilizing most reliable deterministic CNC machine tools, we grind and polish optical glass, fused silica and zinc sulfide for applications range from visible to infrared.
N-BK7 and H-K9L domes: N-BK7 domes are available directly from stock, and are used primarily in meteorology applications. BK7 offers excellent transmission from 300nm up to 2µm. BK7 is a relatively hard material, with excellent chemical durability. Our custom BK7 domes are practically free from bubbles and inclusions, making them perfect for high performance visible applications.
UV fused silica domes: For applications operating in the deeper UV range, we offer a range of UV fused silica domes. Fused silica domes are commonly used in underwater applications at extremely high pressures. Our Corning 7890 2G and Spectrosil 2000 fused silica both offer over 85% transmission at wavelengths as low as 185nm.
Zinc Sulfide domes: For infrared applications we can provide sapphire domes. Sapphire is an extremely hard material with transmission of over 80% in the 2-5µm wavelength range. As with fused silica, sapphire is able to withstand extreme pressures, making it the perfect material for underwater camera and infrared-guided missile applications.
Factory Standard – Contact us for optical design manufacturinglimit or custom specifications
Material: BK7 and more
Diameter: 20～300mm
Wall Thickness>1mm（Diameter20）
Surface accuracy: 3lambda
Dimensional Tolerance: +/-0.1mm
scratch & dig: 60/40
C-A:145+0/-0.05mm
Radius:R1=76mm，R2=80mmDome shall provide angular transmissions >=93%, between incident angles of ±25 degrees
在线联系供应商
Other supplier products
 |
Sapphire Lenses | Sapphire is the best medium for spherical lenses that require a broad spectrum of light transmission and high optical clarity, especially in demand... |
 |
Calcium Fluoride Lenses | Hyperion Optics supplies uncoated 1/2 inch and 1 inch in diameter Calcium Fluoride CaF2 lenses. Please talk to our technicians for your custom requ... |
 |
Silicon Lenses | Hyperion Optics utilize optical grade silicon which is specified with a resistivity of 10-40 Ohm-cm higher than most semiconductor applications. Fo... |
 |
Asphere Lenses | The complex surface profile of an asphere can significantly reduce or even eliminate spherical aberrations comparing to spherical lenses. Hence, as... |
 |
Calcium Fluoride Lenses | Hyperion Optics supplies uncoated 1/2 inch and 1 inch in diameter Calcium Fluoride (CaF2) lenses. Please talk to our technicians for your custom re... |
Same products
 |
Sapphire Lenses | 卖方: Hyperion Optics | Sapphire is the best medium for sapphire glasslenses that require a broad spectrum of light trans... |
 |
Magnesium Fluoride Lenses | 卖方: Hyperion Optics | Uses of Magnesium Fluoride CVD magnesium fluoride (MgF2-CVD) has good mechanical properties, che... |
 |
Germanium Lenses | 卖方: Hyperion Optics | In the range of 2-12 μm, germanium is the most commonly used material for the production of sp... |
 |
Gallium Arsenide Lenses | 卖方: Hyperion Optics | GaAs is semi insulator, which can be used in large power continuous CO2 laser system to replace t... |
 |
Chalcogenide Lenses | 卖方: Hyperion Optics | Chalcogenide glassis containing one or more chalcogens (sulfur, selenium and tellurium, but exclu... |
