PET polyester release film with silicon coated
PET polyester release film with silicon coated
PET release film
PET characteristic
1.PET release film with a flat bright surface, high cleanliness, no cockle, grain, air bubble, pinhole, scratch and color lines.
2. PET release film has excellent physical and mechanical properties, little thickness tolerance, even transparency , low hot-shrinkage rate, good tensile strength.
3. PET release film surface release matter coating uniform ,little release force run-out tolerance, high SAS.
4. PET release film can be cut into roll or disk, has little dependence on storage temperature, storage humidity, storage time.
It is mainly used for: self-adhesive waterproof coil materials, waterproof materials, production cable, packaging materials and so on.
Performance: high temperature resistance, good luster, tensile strength, longitudinal MD215, lateral TD254.
Film color: transparent, milky white.
Film thickness: 0.02 ~ 0.5 mm
Film width: 0.05 ~ 2.02 m, width can be customized according to customer's requirements.
在线联系供应商
Other supplier products
 |
100 Micron PET film used as bitumen waterproof membrane reinforcement | Reinforcement film Characteristic: Application: waterproof rolling material reinforcement film Color: red, blue, white and plastic primary color, c... |
 |
Self adhesive Bitumen Waterproof Membrane manufacturer | Self-adhesive Bitumen Waterproof Membrane (without reinforcement) Self-adhesive Bitumen Waterproof Membrane (with reinforcement) Introduction: The... |
 |
POF heat shrink film/package film | POF heat shrink film/package film Its main advantage is excellent hot slip property.When the film without hot slip property,the hot surface after s... |
 |
PE heat shrink film/package film | PE heat shrink film/package film Heat shrink filmTechnical parameters:Width: single 0.2m~9mTear strength: horizontal ≥40kn/mVertical ≥40kn/mT... |
 |
Embossed PE release film for self adhesive bitumen waterproof membrane | Embossed PE release film for self adhesive bitumen waterproof membrane Embossed PE release film Release material for waterproof membraneeasy to con... |
Same products
 |
Protective Film For Car Hood Surface | 卖方: Guangdong NB Technology Co,.Ltd | Protective Film For Car Hood Surface product description As it is known to us that the surfaces... |
 |
PLA Sheet & Film | 卖方: CHANGZHOU EASY JOINT IMPORT&EXPORT CO.,LTD. | PLA Sheet & Film Description The mechanical properties of PLA sheets are very similar to PET... |
 |
HS/LT-006 Heat Transfer PET Film for Litho Offset Printing | 卖方: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-006 polyester transfer filmis specially coated for litho transfer printing. It is very sm... |
 |
HS/CP-007 Silicone Pet Transfer Films | 卖方: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-007Silicone Ink Heat TransferFilms HS/CP-007 is a heat transfer PET filmfor silicone inks ... |
 |
HS/CP-003 Two Side Matt Pet Transfer Films for Screenprint | 卖方: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-003 is a matte finished polyester release filmcoated for screen printing. Two side-release ... |
