BGM 6 Zoning Amplifier
BGM 6 Zoning Amplifier
※ CE & RoHS certified.
※ Power rates: 60W/120W/240W/350W/500W available.
※ 6-zoned 100V speaker outputs with separate switch ON/OFF and LED indicator.
※ Aluminium alloy panel with standard 19" 2U height.
※ TOSHIBA amplifier transistors.
※ 100% pure copper toroidal transformers.
※ 70V/100V and 4~16Ω loads.
※ 3 MIC inputs,2 LINE inputs,1 LINE output.
※ Individual volume controller for MIC & AUX inputs.
※ MASTER volume controller.
※ BASS and TREBLE tone controller.
※ MIC1 has priority over other inputs.
※ Protections of short circuit,overload,high temperature.
Description
The BGM 6 Zoning AmplifiersAmplifiers are designed with overall 70/100-volt or 4 to 16 ohms(Ω) loads and featured an industry leading 6- zoned 100 volt load solution, skillfully engineered into a 2U housing with rack mounting holes on both ends of front panel.
60/120/240/350/500 watts of amplifier power are available,with provided an audio output to 6 different zones within the venue,
each zone has its own separate switch on/off manually operated on front panel.
Like any other mixer amplifiers of ours,the 6 zoned amplifiers support two aux mono inputs,three local micro inputs via 6.3mm interface,featuring muting function that MIC1 overrides MIC2,MIC3 AUX1,AUX2 with 0~30dB attenuation.
Widely used for any kind of public areas where background music and voice announcement system are required.
Note:
- 4-16 Ω output drives the speakers based on impedances.
- 70V/100V outputs drive the speakers with transformer.
- Do not use both the 4-16 Ω,70V and 100V terminals at the same time.
- Impedances indicated in the figures represent the total speaker system (load) impedances.
- Mute sensitivity control: Adjust the threshold level to activate the MIC1 input priority function.
How to Install 6 Zone MP3 FM Tuner Amplifier?
The amplifier can be divided into front amplifier circuit and post amplifier circuit. The box body that has the combination of these two circuits is a mixer amplifier. In addition, if the front amplifier circuit and the post stage amplifier circuit are separately installed in two boxes, the front amplifier circuit is the tone amplifier circuit, commonly known as the front stage, is to amplify the various sound source signals for the post stage amplifier to drive the sound box; the pure post stage amplifier, commonly known as the post stage, the post stage can better drive the sound box only through the front stage.
Front amplifier is the pre-amplifier and control part before the amplifier. It has functions like enhance the voltage amplitude of the signal and provide input signal selection, tone adjustment and volume control. The pre-amplifier is also known as the front stage. The power amplifier, short for amplifier, is an electronic device used to enhance the signal frequency to drive the loudspeaker. The power amplifier without auxiliary functions such as signal source selection and volume control is called the post stage. The box body which is equipped with both the front amplifier and power amplifier is called a mixer amplifier.
RU-AUDIO is a leadingBGM Amplifiermanufacturers providing commercial speaker system.Please feel free to contact RU-AUDIO
在线联系供应商
Other supplier products
 |
Pendant Speakers | The RH-AUDIO Pendant Speakers are designed for use where traditional ceiling mounted speakers are difficult or impractical to install,providing cov... |
 |
2.4G MP3 FM Bluetooth Digital Class-D Amplifier | The RH AUDIOSwitching Power Digital Amplifiers are designed as convenient solution for small to medium PA installations with Wireless 2.4G receiver... |
 |
Digital Class-D Amplifiers | RH-AUDIO Digital Class-D Amplifiers or called as switching amplifiers are electronic amplifiers in which the amplifying devices operate as electron... |
 |
Best Sound Reinforcement Speaker RH-KT24 for Gardens | Best Sound Reinforcement SpeakerRH-KT24 for Gardens ※ Waterproof house and speaker diver with IP66 rating ※ Squirrel shape ※ 70V 100V transformer b... |
 |
16 Zone Speaker Selector RH2813AM | The RH AUDIO16-zone speaker selector switch RH2813AM has 4 channel inputs (A1,A2,A3,A4) of amplified signal for BGM,with 4 channel inputs (B1,B2,B3... |
Same products
 |
MAG808C 8 Zones Remote Control Panel | 卖方: Guangzhou DSPPA Audio Co., Ltd. | Features Network port balanced output audio Audio signal level indicator Partition source co... |
 |
MAG808 8x8 Digital Audio Matrix PA System | 卖方: Guangzhou DSPPA Audio Co., Ltd. | Cheap pa system Features 7” touch screen, built-in control software, integrated with ... |
 |
MAG6865 650W IP Based Network Amplifier | 卖方: Guangzhou DSPPA Audio Co., Ltd. | Features High-grade aluminum-alloy drawn panel; Can be used in any place accessible to the ne... |
 |
MAG6825 250W IP Based Network Amplifier | 卖方: Guangzhou DSPPA Audio Co., Ltd. | Features High-grade aluminum-alloy drawn panel; Can be used in any place accessible to the ne... |
 |
MAG6806 Network Amplifier | 卖方: Guangzhou DSPPA Audio Co., Ltd. | Introduction lMAG68 series best network amplifieris a kind of fully networking digital analog-di... |
