.

cable puller,Cable Drum Winch


The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.


在线联系供应商

至: Bazhou Lineng Hardware Tools CO.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

L06S10 wall Tracing Duct Rod
L06S10 wall Tracing Duct Rod 1. It is easy to lead, can be used in narrow passage and limited space 2. A lot of the handle, the user can better control to use 3. Self expansion...
T30 Feeney Cable Rail Lag Quick Connect 1/8
T30 Feeney Cable Rail Lag Quick Connect 1/8" 1.Made of steel wire rope 2.Density: 8(g/m) 3.Rod diameter 2(mm) 4.Temperature - 800 to 800 (℃) 5.Traction tension failure 800(kg) Operation: 1.B...
HZ-65C/85C/105C Hydraulic cable Cutter
HZ-65C/85C/105C Hydraulic cable Cutter FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1.Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ens...
CPC-50A Hand held stainless cable cutter
CPC-50A Hand held stainless cable cutter Specifications Hydraulic cable cutter Head rotates 350 degree Flip top cutting head rotates 350 degree Two stage hydraulic to reduce cutting cycle ...
HZ-65C/85C/105C armoured Cu/Alu cable cutter
HZ-65C/85C/105C armoured Cu/Alu cable cutter FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1.Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ens...
供应产品

Same products

High voltage slip-ring motors
High voltage slip-ring motors 卖方: Hebei Changli Electric Tech. Co., Ltd. Changli high voltage modular induction motors allow industries to operate within a wide power ran...
A4 Series High Voltage Electric Motors with GOST Standards
A4 Series High Voltage Electric Motors with GOST Standards 卖方: Hebei Changli Electric Tech. Co., Ltd. A4 Series High Voltage Electric Motors with GOST Standards A4 Series High Voltage Motors and Y Se...
IEC Standard/ GOST Standard Medium Voltage Electric Motors/Asynchronous Motors 
IEC Standard/ GOST Standard Medium Voltage Electric Motors/Asynchronous Motors  卖方: Hebei Changli Electric Tech. Co., Ltd. Y (A4), YKK(DAZO) series high-voltage three-phase asynchronous motor (framesize 355~1120mm) is a ...
YE3 Series Three-Phase Asynchronous Motors
YE3 Series Three-Phase Asynchronous Motors 卖方: Hebei Changli Electric Tech. Co., Ltd. Applicable scope:General-purpose places that need energy conservation and continuous operation, s...
2rb 310-7AA01 Side Channel Blower
2rb 310-7AA01 Side Channel Blower 卖方: Greentech International (Zhangqiu) Co., Ltd Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The ...