pulling hoist
The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the
grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on
either side of the rope and pulled tight rope.
在线联系供应商
Other supplier products
Cable Pulling Grips/side pull steel wire mesh for cable | Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to han... | |
Cable Drum Handling 5tons and 10 tons Braked Drum Stand | Application: applied in the supporting of reel when laying guiding cable during line construction.Rack jacks suitable for cable tray support, durab... | |
fiberglass fish tapes | Available in lengths of 100m,200m and 300m with a wheeled cage for easy transport. The unit is available with meter markings and comes standard wit... | |
fiberglass duct rodder | Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assem... | |
with strengthen the core insulating rodder | Features Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible ... |
Same products
Made in China Pressure Switch HC0622-24 for thermal power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Pressure Switch HC0622-24 for thermal power plant YOYIK professional production an... | |
Gas Torch | 卖方: Ningbo Shuai Xian Regulator Co., Ltd | Introduction Set packed with hoses, regulator arm support of gas Torch Gas blow torchSpecific... | |
Gas Regulator Connector | 卖方: Ningbo Shuai Xian Regulator Co., Ltd | barbecue gas connectorused in conjunction with a cylinder valve to deliver an unreduced pressure ... | |
Gas Regulator Accessories, Gas Hose Fitting & Torch | 卖方: Ningbo Shuai Xian Regulator Co., Ltd | Integrated Gas Technologies(IGT®) supplies gas regulator outlet fittinglike gas regulator hos... | |
Gas Regulator | 卖方: Ningbo Shuai Xian Regulator Co., Ltd | Integrated Gas Technologies(IGT®) is a global gas control equipment company founded 2006 exce... |