EMHEATER servo motores and drive
EMB Series Servo Drive specification
Specifications of EMB Servo Drive
Power Supply
Single-phase AC200V~240V 50/60Hz
Three-phase AC200V~240V 50/60Hz
Environment
Temperature
Operating Temperature: 0~45°C Storage Temperature: -40~50°C
Humidity
< 90% (non-dewing)
Vibration
< 0.5G(4.9m/S2) 10~60Hz (Non-continuous operation)
Control Mode
Position Control Mode
Speed Control Mode(External analog signal / Internal parameters)
Speed Control Trial Run
JOG Trial Run
Regenerative break
Internal or external
feature
frequency response
200Hz or higher
rate volatility
0.03% or less at load fluctuation 0 to 100% (at rated speed)
0.02% or less at power fluctuation -15 to +10% (at rated speed)
Speed Control Range
1:5000
input pulse frequency
0~500kHz
control input
1.Servo On
2.Alarm clear
3.Pulse clear / Internal speed selection 1
4.Reference pulse inhibit / Internal speed selection 2
5.Forward run prohibited
6.Reverse run prohibited
7.2rd electronic gear ratio / zero clamp
control Output
1.Servo ready
2.Servo alarm
3.Positioning completion / At Speed reached
4.Mechanical brake control
5.Z Pulse output
Communication Interface
Standard RS-485,RS-232
Position Control Mode
Pulse Type
1,Pulse + Direction
2,CCW pulse + CW pulse
3,A phase + B phase
Electronic Gear
1~32767/1~32767
Feedback
1~2500 ppr,adjustable according to the Encoder
Speed Control Mode
4 Internal speed settings
External analog signal (DC 0~±10V)
Accel / Decel Function
Adjustable by parameters :1~10000ms(0~1000r/min or 1000~0r/min)
Torque limit Function
Torque limit range:-300~+300%
Monitor Functions
Motor rotation speed,Motor feedback pulse number,Pulse counts of pulse command,Position error counts,Motor torque,Motor current,rotor position,Input frequency of pulse command,Running status,I/O status, etc.
Protective Functions
Overspeed,Overvoltage,Low voltage,Overcurrent,Overload ,Encoder error ,Overheated,Excessive deviation, etc.
Display and Operation
6-digit LCD display panel,4 dip switches,2 LED lights
Applicable load’s moment of Inertia
Less than 5 times of the Rotor moment of Inertia
EMM-130 Series motor specification
Features:
1.1The max torque is up to 200~300% of rated torque.
1.2The max current is up to 200~300% of rated current.
1.3 The max speed is up to 3200rpm.
1.4 Be used to drive the feed shaft of various machineries.
1.5 Various models (1.0KW~2.35KW, with brake etc).
1.6 Standard mounted incremental encoder 2500rpm, optional absolute encoder 131072rpm or resolver.
1.7 Standard protection configuration is IP65
1.8 The malfunction ratio is less than 0.01% within 18 months warranty.
Other supplier products
供应产品
Same products
