INR18650-3000mAh Li-ion Rechargeable cylindrical battery,18650 battery,High security lithium ion battery,power tool lithium ion battery supplier
INR18650-3000mAh Li-ion Rechargeable cylindrical battery,18650 battery,High security lithium ion battery,power tool lithium ion battery supplier
3000mah Li-Ion BatteryProductDetails:
|
Items |
Specifications |
|
INR18650-3000 |
|
|
2950mAhCharge: 0.5C, 4.20V,CCCV 150mA cut-off, Discharge: 0.2C, 2.5V discharge cut-off |
|
|
CCCV, 1.50A, 4.20 ± 0.05 V, 150mA cut-off |
|
|
CCCV, 4A, 4.20 ± 0.05 V, 100mA cut-off |
|
|
15 A |
|
|
30A（ 2s pulse ） |
|
|
≤18.40 mm |
|
|
≤65.50mm |
|
|
≤ 48. 0g |
|
|
≤ 18 mΩ |
|
|
Charge: 0℃～50℃ |
|
|
Discharge : -20℃～75℃ |
|
|
Storage: -20℃～45℃ |
Characteristic of Long life 18650 battery
- Environmental conditions
Unless otherwise specified, all tests stated in this specification are conducted at temperature 23±3°and humidity under 65%.
(1) Amp-meter and volt-meter
The amp-meter and volt-meter should have an accuracy of the grade 0.5mA and mV or higher.
(2)Slide caliper
The slide caliper should have 0.01 mm scale.
(3)Impedance meter
The impedance meter with AC 1kHz should be used.
charging the cell CCCV with charge current 0.5C, constant voltage 4.2V and 150mA cut-off in CV mode at 23℃ for capacity.
discharge current of 600mA(0.2C) with 2.5V cut-off at 23℃within 1hour after the standard charge.
Electrical Characteristic for power tool rechargeable Li-ion battery supplier
|
Item |
Standard |
Test Method |
|
|
1 |
Discharge rate capabilities |
Standard charged, then rest for 30mins and discharge at 0.2C、1C、3C、5 C and 2.5V cut-off |
|
|
2 |
capacity retention and recovery |
Residual capacity≥94％ Recoverablecapacity≥*98％ |
Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23℃±3℃， Stored for 28 days, then discharge at 0.2 C to 2.75V measuring residual capacity; Then standard charge/discharge measure recoverable capacity. |
|
3 |
Low TemperaturePerformance |
discharge capacity≥85% rated capacityno distortion and no rupture |
The cell shall be charged in accordance with the standard charge. Then stored in the temperature of -10℃±1℃ for4h, Discharge at the constant current of 0.2C down to the end-of-discharge voltage 2.750V. |
|
4 |
Cycle Life |
1C charged the cell to 4.2V, then change to charge with constant voltage till the current less than or equal to 0.04C, rest for 30mins; 10A discharge to 2.75V, one cycle is finished, rest for 30mins. Then repeat above steps, when capacity is less than 70% of initial capacity, the battery life is over. |
Ship
The cells might be damaged during shipping by shock. If any abnormal features of the cells are found such as deformation of the cell package, smelling of an electrolyte, an electrolyte leakage and others, the cells shall never be used any more. The Cells with a smell of the electrolyte or a leakage shall be placed away from fire to avoid firing.
Storageof power tool 18650 battery
The cell shall be stored at the environmental condition of -20℃- 45℃ and 65%±20% RH. The voltage for long time storage shall be 3.5V-3.7V range. If the cell has to be storied for a long time (Over 3 months), the environmental condition should be: Temperature: 23℃±3℃Humidity: 65%±20％RH；please activate the battery once every 3 months according to the following method: Charge with current 0.2C until the voltage achieve to 3.7V.
The company founded in 2014, focus on producing cylindrical power lithium-ion batteries. The company supply Electric vehicle cylindrical lithium battery, which include 1500mAh, 1300mAh, 2000mAh, 2200mAh, 2500mAh, 2600mAh Li-ion battery and 3000mAh Li-ion battery. All adopt the most advanced extrusion coating production technology and yearly production reaches to 250 million Ah power type 18650 High security lithium ion battery. Our products have high quality and competitive prices.
If you want to learn more about the High security lithium ion battery, please visit here.
