Plating Through Hole PCB

ZF Electronics, as one of the top circuit board supplierin China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB. It provide pcb board, single layer pcb, multi layer board, rigid flex pcb, aluminum pcb,etc.

Through hole is the most common type. You only need to pick up the PCB to face the light, and the hole that can see the light is what we are looking for. This is also the simplest type of hole, because when making it, you only need to use a drill or a laser to directly drill the PCB, and the cost is relatively cheap. But on the other hand, some circuit layers do not need to connect the through hole. For example, there is a six-story house and you buy its third and fourth floors. You want to design a staircase inside that only connects the third floor to the fourth floor. It is fine between the fourth floor. However, the space on the fourth floor is invisibly used up by the original staircase connecting the first floor to the sixth floor. So, although through hole is cheap, it sometimes uses more PCB space.

Pack and unpack (PAU) of through-hole PCB

This process is used to prepare through-hole arrays. Unlike other double exposure processes, this process does not directly provide additional graphic resolution. The graphic resolution is only obtained during the first exposure, and the second exposure is just to select the required through a pth plated through holein the dense array.

Main difficulties of the pack and unpack (PAU) of pth hole in pcb

The main difficulty is how to cure the first layer of photoresist, that is, it is necessary to avoid damage to the first layer of photoresist during spin-coating of the second layer of photoresist and the influence on the first layer of photoresist during the second development.

Two solutions are proposed for this.

First, the two photoresists use different solvents, and the first layer of photoresist is insoluble in the solvent of the second layer of photoresist. The first layer of photoresist is soluble in ethanol but insoluble in PGMEA.

Second, the UV curing process is used to fix the first layer of the photoresist pattern. The curing process makes the first layer of photoresist very firm and prevents it from being dissolved by the second layer of photoresist solvent.

Grouping of through hole vias pcb

The through-hole is traditionally divided into two groups: plated (supported) holes and non-plated (unsupported) holes. "Supported" refers to the plating on the hole wall. Non-plated or unsupported holes may or may not have bonding pads, such as mounting holes and non-porous wall plating. This is a manufacturing term, but for design, holes should be divided into two types: welded and unwelded.

If you have questions about our plating through hole PCB production capacity, or the specifications required for your custom project are not listed on this page, please feel free to contact us. We will reply within one workday. We will continue to provide quotation support and design support. Welcome to learn about our production process.

We provide pcb board with holes, circuit board with holesand pcb via plating,etc.

Other supplier products

	Multilayer PCB	Printed circuit board (PCB) now plays the most important role in electronic products. The PCB used in the past was very simple and limited to a sin...
	Buried Via PCB	ZF Electronics is a China Shenzhen-based printed circuit board assembly manufacturerand PCB assembler. Shenzhen has been the world's center of elec...
	PCB Prototype	Are you creating a new printed circuit board design? Printed circuit boards have many technical uses. However, it is more cost-effective to conduct...
	FR4 PCB	ZF Electronics is a China Shenzhen-based printed circuit board assembly manufacturerand PCB assembler. Shenzhen has been the world's center of elec...
	High TG PCB	It is well known that the base material (polymer or glass) is changing from a glassy, solid, rigid state to a rubbery state when the temperature ri...

供应产品

Same products

	断路器开关	卖方: 839459	断路器开关产品: 断路器开关，作为电路保护的核心元件，集安全、高效、智能于一身。它能自动检测并切断异常电流，有效防止电气火灾和设备损坏，为家庭、工业及商业用电提供坚实的安全屏障。采用先进技术与材...
	VZO-12系列户外高压真空断路器	卖方: 839459	户外高压真空断路器: VZO-12系列型户外高压真空断路器(以下简称断路器）为额定电压12kV,三相交流50Hz的户外配电设备。它采用真空灭弧和SF6气体作为绝缘介质,是MVXOZ-12型柱上真...
	真空断路器	卖方: 839459	固封式户内高压真空断路器： VZCN-12系列户内高压真空断路器,额定电压为12KV，三相交流50Hz的户内高压开关设备,适用于发电厂、变电所及工矿企业输配电系统的控制或保护开关，尤其适用于高海...
	真空断路器	卖方: 839459	侧装式户内高压真空断路器: 　真空断路器通常可分多个电压等级，低压型一般用于防爆电气使用，例如煤矿等等。其额定电流达到5000A，开断电流达到50kA的较好水平，并已发展到电压达35kV等级。 ...
	DELIVER MOLDING MECHANICAL DESIGNS SYSTEMATICALLY	卖方: GreensTone (Shenzhen) Electronics Co., Limited	GreensTone mechanical design engineers will work with your team to design and test the best solut...