Ventilator Circuit Support Arm (Light Type)
Pigeon MedicalCircuit Support Arm (Light Type) hook can provide a secure connection for the Ventilator, CPAP and Anesthesia Machine breathing circuit that will be maintained at all times. Three separate adjustment points allow this ventilator circuit holder to be positioned in many different ways and at various angles. The features of this support arm include ergonomic tightening knobs, a fine-tune adjustment knob, and a one-year warranty. It is fully capable of being mounted to the side rail on a ventilator by using our optional Circuit Support Arm Mounting Clamp.
Working Principle of Circuit Support Arm (Light Type)
A support arm for use in a respiratory circuit is provided. The support arm includes a plurality of arm segments that are movably connected with one another such that the arm segments are adjustable with respect to another. The respiratory circuit of this ventilator arm is operably disposed at a point of connection between at least two of the arm segments. The respiratory support member is configured for engaging the respiratory circuit to support the respiratory circuit.
Features of Circuit Support Arm (Light Type)
Hook can support the weight less than 4.2 kgs and keep stable.
Within 4.2kgs tension, breathing circuit holderhas no obvious change, and each joint can be stable for 10 minutes.
The handle screw can be regulated by the joint.
The lifespan of plastic accessories is more than 5 years
Can be used with various medical devices with breathing circuits
Specification of anesthesia breathing circuit holder(Light Type)
|
Model |
Circuit Support Arm (Light Type) |
|
Product Name |
Breathing Circuit Ventilator Support Arm Hose Holder |
|
Material |
Stainless steel/Aluminum |
|
Diameter of arm pipe |
14mm |
|
Size(small) 14mm |
390 x 380 x 380 x 95mm |
|
Maximum Bearable Weight |
|
|
Joint Adjusting Rate |
>2,500times |
|
Lifespan of Plastic Component |
>5years |
|
OEM |
Available |
|
Type |
Breathing apparatus |
|
Surface Treatment |
Oxidation, electroplating |
There are many medical ventilator companies, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
Infant Bed Manufacturer | Pigeon Medical PN-1000A infant bed has a lower center of gravity, more mass, a broader base of support and can hold a larger baby than a bassinet. ... |
 |
High Flow Nasal Cannula (HFNC) Manufacturer | High Flow Nasal Cannula machine (HFNC machine), also known as medical high flow oxygen machine, is a high flow oxygen delivery device. High Flow Na... |
 |
AD-I NCPAP(nasal Continuous Positive Airway Pressure) | AD-I NCPAP Is a cost-effective product, very popular in the market. Equipped with a high-performance portable medical air compressor, multiple mode... |
 |
AD-I Bubble CPAP | What Is Bubble CPAP? AD-I NCPAP(nasal Continuous Positive Airway Pressure) AD-I infant bubble CPAPmachine is a cost-effective product, very popul... |
 |
Ventilator Circuit Support Arm (Heavy Type) | Ventilator Circuit Support Arm(Heavy Type) Pigeon Medical Circuit Support Arm(Heavy Type) hook can offers ventilator accessories including our uti... |
Same products
 |
断路器开关 | 卖方: 839459 | 断路器开关产品: 断路器开关，作为电路保护的核心元件，集安全、高效、智能于一身。它能自动检测并切断异常电流，有效防止电气火灾和设备损坏，为家庭、工业及商业用电提供坚实的安全屏障。采用先进技术与材... |
 |
VZO-12系列户外高压真空断路器 | 卖方: 839459 | 户外高压真空断路器: VZO-12系列型户外高压真空断路器(以下简称断路器）为额定电压12kV,三相交流50Hz的户外配电设备。它采用真空灭弧和SF6气体作为绝缘介质,是MVXOZ-12型柱上真... |
 |
真空断路器 | 卖方: 839459 | 固封式户内高压真空断路器： VZCN-12系列户内高压真空断路器,额定电压为12KV，三相交流50Hz的户内高压开关设备,适用于发电厂、变电所及工矿企业输配电系统的控制或保护开关，尤其适用于高海... |
 |
真空断路器 | 卖方: 839459 | 侧装式户内高压真空断路器: 真空断路器通常可分多个电压等级，低压型一般用于防爆电气使用，例如煤矿等等。其额定电流达到5000A，开断电流达到50kA的较好水平，并已发展到电压达35kV等级。 ... |
 |
DELIVER MOLDING MECHANICAL DESIGNS SYSTEMATICALLY | 卖方: GreensTone (Shenzhen) Electronics Co., Limited | GreensTone mechanical design engineers will work with your team to design and test the best solut... |
