MIL-DTL-83513 MICRO D CONNECTOR
The Sunkye family of TwistPin equipped Micro-D subminiature connectors to offer outstanding mating performance, durability, and minimal contact resistance. Sunkye Micro-D Connectors feature high-density micro TwistPin contacts set on 1.27mm centers in arrangements from 9 to 130 contacts. They are available with insulated and uninsulated wire, PCB, solder cup and flex terminations and are supplied as MIL-DTL-83513 or commercial variations. Our 83513 Micro-D and COTS connectors provide a reliable solution for all high-performance interconnect requirements including high temperature and hermetic applications.
83513 micro d connectorsDescription：
By its very design, the Micro-D connector system meets all the requirements of robustness, durability, low contact resistance, high current, dielectric strength, shock, and vibration. With 1.27 mm (.050") contact spacing, Micro-D connectors, half the size of D-sub connectors, represent an excellent solution for saving both space and weight. In addition to a complete range of Micro-D connectors to MIL-DTL-83513, Sunkye' also offers Micro-D PCB connectors and cable assemblies in both metal and plastic bodied versions. With its many possible configurations, Micro-D technology is perfectly suited to a multitude of systems where weight, miniaturization or signal transmission integrity is paramount: applications benefiting from this technology include everything from missiles and their guidance systems, through oil well drilling tools to medical devices, satellites, and scientific research. For very specific applications such as medical MRI scanners or low magnetic field detection systems, Sunkye' has developed a range of non-magnetic connectors using new materials and surface treatments, avoiding ferromagnetic materials. Hermetic connectors are also offered for applications where an enclosure needs to be fully sealed from the outside world.
The Twist Pin contact by its design and performance enables the system to meet the most severe requirements – often significantly more so than stipulated in the MIL-DTL-83513 and MIL-DTL-32139 standards. The male Micro-D contact is made up of 10 strands of beryllium-copper and copper alloy twisted together, welded then bumped. These sprung strands are in fact compressed during insertion into the turned female contact and therefore a high number of electrical contact points are permanently assured while retaining flexibility and ease of insertion/ extraction. The bulged point will be compressed inside the socket during insertion. Insertion and retention performance of the twist pin and socket mated pair. Both socket contact chamfer and twist pin hemispherical radius contribute to ensuring adequate insertion even in case of misalignment.
Range of Micro-D connectors which is covered by the MIL-DTL-83513* standard is ideally suited to equipment and applications where weight, miniaturization and long term performance are required. It is available:
- In 10 contact arrangements (9 to 100 contacts) for rectangular Micro-D connectors.
在线联系供应商
Other supplier products
 |
MIL-DTL-83513 Twist Pin Plug Contacts | mil c 83513 specification： SunkyeMIL-DTL-83513 Micro D sub connectors fitted Twist Pin Contact System, offer outstanding mating performance, provi... |
 |
Sunkye R04S Space Grade Micro D Right Angle To PCB Type Connector | Brief Introduction Micro-D connectors for space applications. Twist pin contacts, high density interconnection, 1.27mm contact spacing and 1.1mm sp... |
 |
Sunkey R04J Series Solder Cup Glass-Sintered Sealed Connector | Shell: Kovar alloy sell, finish gold The spacing of arrangemet of the tail:1.27x1.1mm. Termination type: Solder cup. Receptacle The flange with a r... |
 |
Micro Solder Cup Connectors for Choice | Description of Micro Solder Cup Contacts METAL SHELL of Micro Solder Cup Connectors Metal shell recommended for environmental and EMI applicati... |
 |
MIL-DTL-83513 Twist Pin Plug Contacts for Choice | Description of MIL-DTL-83513 Twist Pin Plug Contacts Sunkye MIL DTL 83513 SPECMicro D sub connectors fitted Twist Pin Contact System, offer outs... |
Same products
 |
0.8-C Type Wire-to-Board Strip Connector | 卖方: Zhejiang Wenda Electronics Co., Ltd. | WTB Wire-to-Board Strip Connector() 1、CKT: 2Pin to 25Pin 2、Current rating: 0.5A AC/DC 3、Voltage r... |
 |
2UUL BT03 FPC Connectors for Mobile Repair Tasks | 卖方: 深圳市维客修科技有限公司 | 2UUL FPC 电池连接器扣，适用于 iPhone 和 Android 手机 2UUL BT02 BT03 PW06 电池扣，适用于手机主板启动激活和维修。无需电池。2UUL PW06 19 ... |
 |
3.65MM Pitch Wire-to-Wire Connector | 卖方: ZHEJIANG KUAILI ELECTRONIC CO., LTD. | The PA 3.65mm pitch wire-to-wire connector is a compact and versatile electrical connector common... |
 |
SH (1.0mm) Connector | 卖方: ZHEJIANG KUAILI ELECTRONIC CO., LTD. | The SH (1.0mm) connector distinguishes itself through its thoughtfully engineered design, priorit... |
 |
DF13 1.25mm series connectors | 卖方: ZHEJIANG KUAILI ELECTRONIC CO., LTD. | The DF13 (1.25mm) connector stands out as a reliable and efficient solution for those seeking com... |
