Resin Cable Jointing Kits for Copper and Aluminium Cables

Scotchcast Resin Cable Joint Kit

Product introduction

Cable Joint as an important connection point of the whole power supply network, its running stability will directly affect the quality of the power supply system. Because the cable joint is made artificially in the on-site installation is complete, the environment affected by the construction and operation of the environment, will inevitably cause the error of installation, external damage, cable breakdown caused by explosion and water etc.

 

And in the Cable Joint  breakdown and explosion will release a lot of energy, the surrounding power facilities or personnel to cause harm, or even cause the occurrence of the two accident. To solve these problems, our company developed with fire prevention, waterproof, explosion-proof function Scotchcast Resin Cable Joints, all-round protection, once the explosion or breakdown of cable joints, can effectively protect the surrounding power facilities and other personnel, prevent the occurrence of two damage.

 

Technical characteristics:

1, the shell is made of  Scotchcast Resin, Scotchcast Resin are anisotropic materials, coupled with the formula and additives in a wide range of selectivity, glass steel according to the work environment and the state, adding special flame retardant additives, the glass steel material with good flame retardancy, the main parameters of flame retardant oxygen index should reach 62.5%. A high-quality composite glass steel, it has a special function to prevent acid, alkali, salt, oil and other corrosive media, and will not rust. The coastal areas and chemical sites and long buried underground requirements. Product performance to ensure that accessories can be a long time stable operation.

2, in the combination of Scotchcast Resin Cable Joints with silicone rubber sealing ring to seal the shell, enhance the waterproof performance of the cable intermediate joint.

3, with a strong pressure performance, Scotchcast Resin Cable Joints can withstand the impact from the internal or external.

4, in the Scotchcast Resin Cable Joints side of a sealing plug sealed with silicone rubber discharge hole, and discharge hole direction can be adjusted, once the cable joint explosion, discharge hole on the sealing plug can be quickly opened and can effectively prevent the other cables, or the surrounding environment destruction, flame retardant properties of the shell is also can guarantee the internal flame extinguished due to hypoxia.

5, convenient and quick installation, can meet the requirements of 10kV, 35kV single core and three core cable laying.

6, safe and reliable, widely used in electric power, coal, chemical industry and other high-risk industries and key projects of power supply network.

 

Scope of application:

Glass steel casing is divided into several categories, which can be suitable for 10KV, 35KV, 110KV, 220KV, Cable Joint, 500KV. And can be applied to single core or three core and multi-core cable.

Jointing Kit Contents

Scotchcast Mould body with closure cap

Scotchcast 470W resin bag

Scotch 23 Tape

Armour connection components

Disposable gloves (EN394)

Detailed installation instruction

Instructions: 

The main function of Scotchcast Resin Cable Joint Kit is to withstand a certain external force impact and damage in the middle of the joint.

Dead work

Check with Scotchcast Resin Cable Joint Kit diameter applicable specifications and size with the cable and the middle of the head (the stress cone or shell) is consistent with the size of the;

Check the sealing material Scotchcast Resin Cable Joint Kit (gasket, opening Haff sealing material: glass steel shell and two port cable strip and heat shrinkable tube) is complete;

Check the high voltage cable sealant two component cable plastic packing is complete, the quantity of the component is sufficient;

Scotchcast Resin Cable Joint Kit assembly

The middle section cleaning about installing Scotchcast Resin Cable Joint Kit joints, install the Scotchcast Resin Cable Joint Kit on the second half leads to coaxial cable or grounding cables, a plurality of tightening bolts, two Scotchcast Resin Cable Joint Kit ports and coaxial cable and grounding cable sealing process (including sealing strip and shrink tube); the two components of high voltage cable cable sealant glue mix well; glue, glue should pay attention to its continuity, two groups of glue is filled into the interval of time as short as possible; glue please glue leakage;

Note: a two-component adhesive sealant for high-voltage cable cable in the process of curing some slight volume expansion, so can not be poured too full, generally below the mouth filling glue along the height of 20 to 30mm;

Closed cover mouth, installation is completed.

 

 

 

Contact us 

Person in charge:Caeser

Tel: +86-316-7869911

Fax:+86-316-5661106

Phone:+86 13313261691

E-mial:ych7717@hotmail.com   



在线询价

至: Bazhou WanQi Power Tools Factory
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Traceable Rodders Copper cable in rod
Traceable Rodders Copper cable in rod TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location ...
F.R.P.Duct Rodders Diameter 5mm-15mm
F.R.P.Duct Rodders Diameter 5mm-15mm Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter
5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
Resin Cable Jointing Kits for Copper and Aluminium Cables
Resin Cable Jointing Kits for Copper and Aluminium Cables Scotchcast Resin Cable Joint Kit Product introduction: Cable Joint as an important connection point of the whole power supply network, its run...
Resin Cable Jointing Kits for Copper and Aluminium Cables
Resin Cable Jointing Kits for Copper and Aluminium Cables Scotchcast Resin Cable Joint Kit Product introduction: Cable Joint as an important connection point of the whole power supply network, its run...
供应产品

Same products

多功能直柄超长麻花钻
多功能直柄超长麻花钻 卖方: 河南河一工工具有限公司 材料:高速钢 使用:金属钻孔 硬度:HRC65-67 涂层:Tin,Ticn,Tiain 过程:完全接地 标准:DIN338,DIN340,DIN1897 尺寸:0.5mm-20m...
XYD-130 crawler hydraulic core drilling rig
XYD-130 crawler hydraulic core drilling rig 卖方: 山东巨匠机械集团有限公司 一、XYD-130履带液压岩芯钻机优点1、钻机采用自动伸缩式钻塔,用两支高强度油缸作支撑,一组液压阀控制钻塔仰卧,操作省时。 省力,安全可靠,最大限度的为用户创造效益。2、底盘采用橡胶履带,重...
XYX-130轮式液压岩芯钻机
XYX-130轮式液压岩芯钻机 卖方: 山东巨匠机械集团有限公司 一、XYX-130轮式液压岩芯钻机适应范围   地质普查勘探、道路及高层建筑物基础勘探、各种混凝土结构检查孔、江河堤坝,路基灌浆孔钻孔和直接灌浆、民用水井及地温中央空调等。...
HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig 卖方: 山东巨匠机械集团有限公司 一、HZ-130YY液压岩芯钻机简介 HZ-130YY液压岩芯钻机在普通钻机基础上增加钻机移位滑道,可实现快速更换钻具提高工作效率降低劳动强度。 二、HZ-130YY液压岩芯钻机适用范围 ...
HZ-130Y液压岩芯钻机 钻孔机
HZ-130Y液压岩芯钻机 钻孔机 卖方: 山东巨匠机械集团有限公司 一、HZ-130Y液压岩芯钻机适应范围 地质普查勘探、道路及高层建筑物基础勘探、各种混凝土结构检查孔、江河堤坝,路基灌浆孔钻孔和直接灌浆、民用水井及地温中央空调等。 二、HZ-130Y液压岩...