.

Cable Pulling Rods Telecommunication pipeline tool

Introduction

Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.

We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.

Product introduction

The rod

WanQirods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.

The frames

Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user.

Rod selectIon

Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:

The size of ducting it is to be pushed through

The distance the rod is to be pushed

The number and tightness of bends in the ducting

If the ducting is already occupied by cable

When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.

Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.



在线联系供应商

至: Bazhou WanQi electrical tools factory
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

 Cable Pulling Rods Telecommunication pipeline tool
Cable Pulling Rods Telecommunication pipeline tool Product introduction: Cable Joint as an important connection point of the whole power supply network, its running stability will directly affect th...
Duct Rodder at a large discount
Duct Rodder at a large discount Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
Duct Rodder at a large discount
Duct Rodder at a large discount Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
 Cable Pulling Rods Telecommunication pipeline tool
Cable Pulling Rods Telecommunication pipeline tool Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
 Cable Pulling Rods Telecommunication pipeline tool
Cable Pulling Rods Telecommunication pipeline tool Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
供应产品

Same products

pipe drilling machine
pipe drilling machine 卖方: Hangzhou Evershining Machinery Co.,Ltd ·Model:RD-C4 MaxTappingDiameter:4inch Max Tapping Wall-Thickness:10mm Spindle Speed:120RP...
high efficient pipe threading machine
high efficient pipe threading machine 卖方: Hangzhou Evershining Machinery Co.,Ltd Model: ZT-100A II ·PipeCapacity: 1/2"-4" ·Quick -open Dies Head 1/2”-2”...
CHINESE PROFESSIONAL MANUFACTURER HYDRAULIC CABLE CUTTER P-45 HYDRAULIC STEEL CABLE CUTTER FOR CU/AL/ACSR CABLE
CHINESE PROFESSIONAL MANUFACTURER HYDRAULIC CABLE CUTTER P-45 HYDRAULIC STEEL CABLE CUTTER FOR CU/AL/ACSR CABLE 卖方: Taizhou NAIBO Machinery Co., Ltd Model P-45 Cutting Range Cu/AL/ACSR Cable/Prestressed steel wire dia.≤45mm, Steel bar dia.&le...
WIRE STRIPPING BLADE
WIRE STRIPPING BLADE 卖方: Xiamen Talent Carbide Co.,Ltd Wire stripping bladecan strip various types of wire materials: copper core wire, aluminum core wi...
WIRE DRAWING DIE BLANK
WIRE DRAWING DIE BLANK 卖方: Xiamen Talent Carbide Co.,Ltd According to the working properties, the structure of drawing die core can be divided into five s...