XYX-3 Wheeled Hydraulic Core Drilling Rig
1. Characteristics of XYX-3 wheeled core drilling machine The rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig. Using the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable. With oil pressure feeding mechanism to improve drilling efficiency The pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole. The lifting and falling tower is hydraulic operation, which is convenient and reliable. The diesel engine uses electric start to reduce the labor intensity of the worker. 2. Parameters of XYX-3 wheeled core drilling machine Drilling hole depth 100/ 250/ 300/600 m Maximum opening diameter 300/ 200/150/ 75mm Max open hole caliber 300mm Final hole diameter 75mm Drill pipe 60mm Borehole inclination 90°-65° A vertical scroll of painting Vertical rotation speed of vertical axis 30-1050r/min Vertical reversal speed 29-137r/min Vertical axis stroke 560mm Diameter of shaft inner hole 96mm Vertical axis lifting capacity 60kn Main hoist (hydraulic drive) Single rope lifting speed 0-45m/min Wire rope diameter 14mm Band width 90mm Drum diameter 300mm Reel capacity 30m Maximum lifting capacity of single rope 40kn Auxiliary hoist (hydraulic drive) Drum diameter 140mm Diameter of steel wire 6mm Reel capacity 450m Mud pump Mud pump BW-250 Horizontal three cylinder Flow 250 l/min Working pressure 7mpa Inlet diameter 75mm Outlet diameter 50mm Gear oil pump Double oil pump CBF-F63/25 Front-end flow pressure 63 l/min 20mpa Backend flow pressure 25 l/min 20mpa Rig power Diesel engine FAW Xichai 4 cylinder Electric machinery Y180L-4 22KW Wheeled chassis Bearing capacity of wheel chassis 3.5t Wheel chassis length 2.6m Wheel chassis width 2m Wheel chassis height 0.6m Shandong Master Machinery Group Co.,Ltd. Sales Manager：Aaron Shao Website:
在线联系供应商
Other supplier products
 |
KHYD110 5.5KW Electric Motor Rock Drilling Rig | The brief introductions of rock drilling rig The machine can be fitted with drill stand, and can be drilled horizontally or upward in any dire... |
 |
KY-250 Full Hydraulic Drilling Rig For Metal Mine Exploitation | The brief introductionsof KY-250 metal mine exploration drilling rig The KY250tunneldrilling rigis lsmall in size llight weight lconvenient... |
 |
SPJ-400 water well drilling rig | The features of lSPJ-400 disc drilling rig is powered by diesel engine, and can also be driven by motor in electric power area. lThe drillin... |
 |
XYD-3 Crawler Hydraulic Core Drilling Rig | Characteristicsof XYD-3 crawler drilling rigis mainly used for geological general investigation and exploration,road and tall building founda... |
 |
XY-3 Hydraulic Core Drilling Rig | Featuresof lXY-3 drilling machine adopts CG140 model auto transmission, has10 rotation speeds and reasonable speed range,with eight forward r... |
Same products
 |
89mm Threaded Water Well Drill Pipe | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Introducing our premium 60mm Threaded Water Well Geothermal Drill Pipe, specifically designed for... |
 |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：6... |
 |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 冲击频率：3... |
 |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：5... |
 |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：13mm 空载转速：2000r/min 冲击频率：3... |
