XYX-3 Wheeled Hydraulic Core Drilling Rig
- Characteristicsof
lThe rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig.
lUsing the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable.
lWith oil pressure feeding mechanism to improve drilling efficiency
lThe pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole.
lThe lifting and falling tower is hydraulic operation, which is convenient and reliable.
lThe diesel engine uses electric start to reduce the labor intensity of the worker.
- rameters of
|
Drilling hole depth |
100/ 250/ 300/600 m |
|
Maximum opening diameter |
300/ 200/150/ 75mm |
|
Max open hole caliber |
300mm |
|
Final hole diameter |
75mm |
|
Drill pipe |
60mm |
|
Borehole inclination |
90°-65° |
|
A vertical scroll of painting |
|
|
Vertical rotation speed of vertical axis 30-1050r/min |
|
|
Vertical reversal speed |
29-137r/min |
|
Vertical axis stroke |
560mm |
|
Diameter of shaft inner hole |
96mm |
|
Vertical axis lifting capacity |
60kn |
|
Main hoist (hydraulic drive) |
|
|
Single rope lifting speed |
0-45m/min |
|
Wire rope diameter |
14mm |
|
Band width |
90mm |
|
Drum diameter |
300mm |
|
Reel capacity |
30m |
|
Maximum lifting capacity of single rope |
40kn |
|
Auxiliary hoist (hydraulic drive) |
|
|
Drum diameter |
140mm |
|
Diameter of steel wire |
6mm |
|
Reel capacity |
450m |
|
Mud pump |
|
|
Mud pump |
BW-250 Horizontal three cylinder |
|
Flow |
250l/min |
|
Working pressure |
7mpa |
|
Inlet diameter |
75mm |
|
Outlet diameter |
50mm |
|
Gear oil pump |
|
|
Double oil pump |
CBF-F63/25 |
|
Front-end flow pressure |
63l/min 20mpa |
|
Backend flow pressure |
25l/min 20mpa |
|
Rig power |
|
|
Diesel engine |
FAW Xichai 4 cylinder |
|
Electric machinery |
Y180L-4 22KW |
|
Wheeled chassis |
|
|
Bearing capacity of wheel chassis |
|
|
Wheel chassis length |
|
|
Wheel chassis width |
2m |
|
Wheel chassis height |
|
Shandong Master Machinery Group Co.,Ltd.
Sales Manager：Aaron Shao
Website:
在线联系供应商
Other supplier products
 |
QTZ-1 Portable & Compact Soil Sampling Rig | rief Introductionsof soil sampling rig QTZ-1portable soil drilling rig is a portable soil sampling drilling machine developed by Shandong Mast... |
 |
XYX-200 Wheeled Water Well Drilling Rig walking water well drilling rig | The features of lIt has oil pressure feed mechanism to improve drilling efficiency. lWheel walking mechanism,very convenient for transport an... |
 |
QZ-2C Gasoline Core Drilling Rig | Brief introductionsof QZ-2Ctype gasoline engine portable sampling drillrig is used for geological industrial and civil buildings, bridges, rai... |
 |
SDZ-30S Pneumatic Mountain Drilling Rig | introduction of SDZ-30Smountain drilling rig SDZ-30Sis developed by Shandong Master Machinery Group Co.,Ltd combined with our company’s ... |
 |
Hydraulic water well drilling rig XY-8 Hydraulic Drilling Rig | of lMachineadoptspneumaticshiftFastgear8JS118autotransmissionand clutch,compactstructure,smoothoperation,stableperformance,goodwild card. lU... |
Same products
 |
89mm Threaded Water Well Drill Pipe | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Introducing our premium 60mm Threaded Water Well Geothermal Drill Pipe, specifically designed for... |
 |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：6... |
 |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 冲击频率：3... |
 |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：5... |
 |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：13mm 空载转速：2000r/min 冲击频率：3... |
