XYD-200 Crawler Water Well Drilling Rig
lDrilling rig uses automatic Telescopic drilling rig,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control supination of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits.
lThe chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car body’s shake,reduce the oil consumption.It can walk on the pavement of city and not hurt the pavement.
lThe chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs installate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working.
lUsing 48V electric starting diesel engine reduced the operate's labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly.
lThe machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.
- The specifications of
XYD-200 drilling rig |
|
Drilling depth |
200m |
Maximum opening hole diameter |
75-300mm |
Endhole diameter |
75mm |
Active drilling pipe |
53/59*4200mm |
Drillingpipe diameter |
50/60mm |
Drilling angle |
90°-75° |
Matchedpower (diesel engine) |
|
Weight/dimension |
3000kg, 3800*1950*2700 |
Spindle |
|
Spindle speed |
64/128/287/557r/min |
Spindle stroke |
450mm |
Windlass |
|
Single rope lifting force |
24kn |
Single rope lifting speed |
|
Drum diameter |
140mm |
Wire rope diameter |
13mm |
Windlass capacity in terms of rope length |
35m |
Drilling Tower |
|
Rated load |
5t |
Effective height |
6m |
Tower leg diameter |
89mm |
Mud pump |
|
Model |
BW160 |
Flow |
160l/min |
Maximum pressure |
|
Reciprocating frequency |
165r/min |
Water inlet pipediameter |
51mm*4.5m |
Highpressure water outlet pipe diameter |
32mm*6m |
Shandong Master Machinery Group Co.,Ltd.
Sales Manager:Aaron Shao
Website:
在线联系供应商
Other supplier products
SPJ-300 Water Well Drilling Rig | The features of lSPJ-300 disc drilling rig is powered by diesel engine. In power areas,it can also switch to electric motors. lThe drilling r... | |
KHYD155 Electric Rock Drilling Rig For Coal Mine | The Brief Introductions of rock drilling machine KHYD155 electric drillrock is a tool for rock blasting hole. Drilling rigs should be equippe... | |
XY-44A Hydraulic Drilling Rig | sof XY-44A exploration drilling rigis a multi-purpose spindle diamond core drilling rig suitable for high-speed medium and deep borehole drill... | |
KY-300 Full Hydraulic Drilling Rig For Metal Mine Exploitation | 1.The brief introductions of KY-300 metal mine exploration drilling rig KY-300 tunnel drilling rig is suitable for drilling at any angle in the tun... | |
Portable Manual Water Well Drilling Rig | Brief introductionsofmanualwater well drilling rig: The manual water welldrilling rigis a small, low-cost manual drilling machine designed by our ... |
Same products
89mm Threaded Water Well Drill Pipe | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Introducing our premium 60mm Threaded Water Well Geothermal Drill Pipe, specifically designed for... | |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:20v 钻孔直径:10mm 空载转速:2000r/min 最大扭矩:6... | |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:16v 钻孔直径:10mm 空载转速:2000r/min 冲击频率:3... | |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:16v 钻孔直径:10mm 空载转速:2000r/min 最大扭矩:5... | |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:20v 钻孔直径:13mm 空载转速:2000r/min 冲击频率:3... |