XYX-3 Wheeled Hydraulic Core Drilling Rig
- Characteristicsof
lThe rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig.
lUsing the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable.
lWith oil pressure feeding mechanism to improve drilling efficiency
lThe pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole.
lThe lifting and falling tower is hydraulic operation, which is convenient and reliable.
lThe diesel engine uses electric start to reduce the labor intensity of the worker.
- rameters of
|
Drilling hole depth |
100/ 250/ 300/600 m |
|
Maximum opening diameter |
300/ 200/150/ 75mm |
|
Max open hole caliber |
300mm |
|
Final hole diameter |
75mm |
|
Drill pipe |
60mm |
|
Borehole inclination |
90°-65° |
|
A vertical scroll of painting |
|
|
Vertical rotation speed of vertical axis 30-1050r/min |
|
|
Vertical reversal speed |
29-137r/min |
|
Vertical axis stroke |
560mm |
|
Diameter of shaft inner hole |
96mm |
|
Vertical axis lifting capacity |
60kn |
|
Main hoist (hydraulic drive) |
|
|
Single rope lifting speed |
0-45m/min |
|
Wire rope diameter |
14mm |
|
Band width |
90mm |
|
Drum diameter |
300mm |
|
Reel capacity |
30m |
|
Maximum lifting capacity of single rope |
40kn |
|
Auxiliary hoist (hydraulic drive) |
|
|
Drum diameter |
140mm |
|
Diameter of steel wire |
6mm |
|
Reel capacity |
450m |
|
Mud pump |
|
|
Mud pump |
BW-250 Horizontal three cylinder |
|
Flow |
250l/min |
|
Working pressure |
7mpa |
|
Inlet diameter |
75mm |
|
Outlet diameter |
50mm |
|
Gear oil pump |
|
|
Double oil pump |
CBF-F63/25 |
|
Front-end flow pressure |
63l/min 20mpa |
|
Backend flow pressure |
25l/min 20mpa |
|
Rig power |
|
|
Diesel engine |
FAW Xichai 4 cylinder |
|
Electric machinery |
Y180L-4 22KW |
|
Wheeled chassis |
|
|
Bearing capacity of wheel chassis |
|
|
Wheel chassis length |
|
|
Wheel chassis width |
2m |
|
Wheel chassis height |
|
Shandong Master Machinery Group Co.,Ltd.
Sales Manager：Aaron Shao
Website:
在线联系供应商
Other supplier products
 |
XYC-200A Tricycle Water Well Drilling Rig | XYC-200A tricycle water well drilling rig mainly used forMade in Chinawater well,field irrigation well, engineeringwaterwell,precipitationwel... |
 |
XYC-3 Vehicle-mounted Hydraulic Core Drilling Rig | Main features of XYC-3 vehicle-mounted core drilling rigis amulti-function hydraulic vertical shaft rotary drilling rig. The car chassis ado... |
 |
XYD-200 Crawler Hydraulic Rotary Drilling Rig | Characteristic of ldrilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hy... |
 |
KHYD155 Electric Rock Drilling Rig For Coal Mine | The Brief Introductions of rock drilling machine KHYD155 electric drillrock is a tool for rock blasting hole. lDrilling rigs should be equipp... |
 |
XYD-3 Crawler Hydraulic Core Drilling Rig | Characteristicsof XYD-3 crawler drilling rigis mainly used for geological general investigation and exploration,road and tall building founda... |
Same products
 |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：6... |
 |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 冲击频率：3... |
 |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：5... |
 |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：13mm 空载转速：2000r/min 冲击频率：3... |
 |
Matrix Body PDC Bit For Oil Well Drilling Hard Rock | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide... |
