XYX-3 Wheeled Hydraulic Core Drilling Rig wheels portable drilling machine
- Characteristicsof
The rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig.
Using the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable.
With oil pressure feeding mechanism to improve drilling efficiency
The pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole.
The lifting and falling tower is hydraulic operation, which is convenient and reliable.
The diesel engine uses electric start to reduce the labor intensity of the worker.
- rameters of
|
Drilling hole depth |
100/ 250/ 300/600 m |
|
Maximum opening diameter |
300/ 200/150/ 75mm |
|
Max open hole caliber |
300mm |
|
Final hole diameter |
75mm |
|
Drill pipe |
60mm |
|
Borehole inclination |
90°-65° |
|
A vertical scroll of painting |
|
|
Vertical rotation speed of vertical axis 30-1050r/min |
|
|
Vertical reversal speed |
29-137r/min |
|
Vertical axis stroke |
560mm |
|
Diameter of shaft inner hole |
96mm |
|
Vertical axis lifting capacity |
60kn |
|
Main hoist (hydraulic drive) |
|
|
Single rope lifting speed |
0-45m/min |
|
Wire rope diameter |
14mm |
|
Band width |
90mm |
|
Drum diameter |
300mm |
|
Reel capacity |
30m |
|
Maximum lifting capacity of single rope |
40kn |
|
Auxiliary hoist (hydraulic drive) |
|
|
Drum diameter |
140mm |
|
Diameter of steel wire |
6mm |
|
Reel capacity |
450m |
|
Mud pump |
|
|
Mud pump |
BW-250 Horizontal three cylinder |
|
Flow |
250l/min |
|
Working pressure |
7mpa |
|
Inlet diameter |
75mm |
|
Outlet diameter |
50mm |
|
Gear oil pump |
|
|
Double oil pump |
CBF-F63/25 |
|
Front-end flow pressure |
63l/min 20mpa |
|
Backend flow pressure |
25l/min 20mpa |
|
Rig power |
|
|
Diesel engine |
FAW Xichai 4 cylinder |
|
Electric machinery |
Y180L-4 22KW |
|
Wheeled chassis |
|
|
Bearing capacity of wheel chassis |
|
|
Wheel chassis length |
|
|
Wheel chassis width |
2m |
|
Wheel chassis height |
|
在线联系供应商
Other supplier products
 |
XY-100 Water Well Drilling Rig | The applications of XY-100 water well drilling rig is widely used for Water well drilling, Geological Exploration and Prospecting, Geothermal... |
 |
XY-180 Hydraulic Core Drilling Rig | Applications of The XY-180drilling rigis designed on the basis of the XY-1A drill. It is a low speed and high torque portable drilling machin... |
 |
KY-300 Full Hydraulic Drilling Rig For Metal Mine Exploitation | The brief introductions of KY-300metal mine exploration drilling rig KY-300 tunnel drilling rig is suitable for drilling at any angle in the t... |
 |
XY-3 Hydraulic Core Drilling Rig | Featuresof lXY-3 drilling machine adopts CG140 model auto transmission, has10 rotation speeds and reasonable speed range,with eight forward r... |
 |
QZ-2A Three Phase Electric Sampling Drilling Rig | Brief introductionof QZ-2Aelectric sampling drilling rig QZ-2A typethree-phase sampling drillrig is a portable core sampling drilling rig, pro... |
Same products
 |
89mm Threaded Water Well Drill Pipe | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Introducing our premium 60mm Threaded Water Well Geothermal Drill Pipe, specifically designed for... |
 |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：6... |
 |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 冲击频率：3... |
 |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：5... |
 |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：13mm 空载转速：2000r/min 冲击频率：3... |
