Core barrel with high performance rock roller bit for Pile Foundation
Overview of Core Barrel Roller Bit
The roller bit core barreluses high carbon steel and a special bit Angle to maintain drilling strength and efficiency.
There are three types of core barrels:
Core barrel with bullet teeth is used for cutting an annular ring in rock or concrete(also reinforced concrete).
Core Barrel with roller bitis used in very strong rock formations(compressive strength >100Mpa).
Cross cutter core barrel is mainly used to break rock cores that remain in the borehole after using a core barrel, also suitable for drilling hard, jointed rock(<100Mpa) and for penetrating through layers containing boulders.
Applicable layers: dense sand, gravel, and medium hard rocks, etc..
The Advantage of Core Barrel Roller Bit
The reaming bit consists mainly of four or more cones. The main cutting teeth are new wear-resistant alloys for tungsten carbide inserts and steel teeth. The new formula and the new process of high-quality tungsten carbide teeth improve the service life of the reaming drill. The guide is a cone drill bit or a scraper drill bit.
The bearing seal uses high-performance O-ring seal or metal seal bearing and special grease for imported drill bit.
Special inserts are placed on the outer diameter of the head to reduce the wear of the head during the formation of abrasives in directional and horizontal wells, prolonging the life of the drill.
Replacing Cutters and Cutting Cost-On most Hole Opener designs, the cutters can be easily replaced. The cost to replace a cutter is a fraction of the cost to replace a large tricone rock bit.
在线联系供应商
Other supplier products
 |
Three Blade Wings Drag Rock Drill Bit For soft formations | Overview of Drag Bit Drag bit drillingare manufactured from forged high-quality alloy steel and hard alloy, plus state of art welding technology... |
 |
Hard Rock PDC cone bit Used for drill underground core | Overview of PDC Core Bit GREAT customized made Diamond core bits, which include Matrix body PDC bit and Steel body PDC bit, the Diamond core bit i... |
 |
Three Cone Drill Bit For Soft Formation for water well drilling | Overview of Steel Tooth Bit This superior method provides a stronger, more impact-resistant tooth than milling because the metal particle structur... |
 |
Matrix Body PDC Bit | Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC bits are offered in a variety of... |
 |
Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency | Overview of Hybrid Drill Bit Hybrid bitsare compounded by the PDC fixed cutting and the roller free cutting structure. The teeth on the cone cru... |
Same products
 |
89mm Threaded Water Well Drill Pipe | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Introducing our premium 60mm Threaded Water Well Geothermal Drill Pipe, specifically designed for... |
 |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：6... |
 |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 冲击频率：3... |
 |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：5... |
 |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：13mm 空载转速：2000r/min 冲击频率：3... |
