Wind tower
MEGATRO provides the Wind Power Generating Industry the most reliable, economical MET tower systems in the business. These wind towers are made from solid steel and welded by certified welders, which is the tower units for wind power turbine, applied with wind power Generator during wind power generation. It is the large diameter & thick steel pipe structure below the generator of a wind turbine that supports the turbine, houses the meters and wires, and keeps the turbine high above the ground level to protect the surrounding area and people from the force of the blades. It is also the main stressed components which need to be enough strength and rigidity to endure huge wind pressure and shearing forces. The base also serves to elevate the turbine above surrounding obstacles that could otherwise block the wind. The tower units are formulated to a large tube with a variety of accessories which include platforms, ladders, cable fixings, positioning of switchboard and so on.
Some of MEGATRO wind tower belong to sefl-support type, as same as taper monopole; MEGATRO's all welded design provides maximum tower stiffness, minimum twist/sway and bending. Towers come with single pole and climbing ladder and rest platform and other tower accessories. After fabrication towers are delivered to take sand-blasting, then painting them one by one. First prime painting, then intermediate coat and as last finish painting.
All fabrication will be discussed by both parties and reach an agreement before mast production.
Place of Origin: Qingdao, Shandong, China
Model No: Based on the customer's requirements
Terms of Payment: L/C, T/T
Port of Loading: Qingdao Port
Delivery Lead Time: one month or based on the customer's needs
Design Requirements: based on the customers' specific requirements.
Minimum Order Quantity: 1 set
Performance Standard
Chinese standard or international standard
Material: Chinese material or as per clients material
在线联系供应商
Other supplier products
 |
Copper Aluminum Groove Clamp | MEGATRO provide every type of copper aluminum groove clamp as per client's different requirements, which specification as follow: Copper-Aluminum P... |
 |
anchor rod | Anchor rods, also referred as anchor bolts, concrete embeds or foundation bolts, are embedded in concrete foundations to support power transmission... |
|
|
arm bracing | MEGATRO provides a wide range of arm bracing to meet your needs for mounting equipment to the tower, which use for power transmission line steel to... |
 |
Steel house | Description: Building with our steel framed systems you are getting superior strength, better energy efficiency, less maintenance, a non-combustibl... |
 |
Torch tower | MEGATRO fabricates every type of torch towers, which have angular tower or tubular tower type, but most of adopt tubular tower type, which construc... |
Same products
 |
Single-Cylinder Four-Stroke Gasoline Power Engine | 卖方: TAIZHOU LUBIN ELECTROMECHANICAL CO., LTD. | Product Description This product is a single-cylinder four-stroke gasoline-powered engine featur... |
 |
150g-800g Ozone Generator | 卖方: Guangzhou Quanju Ozone Technology Co., Ltd | Quanju 150g-50kgozone generatorwith high ozone concentration, suitable for water treatment projec... |
 |
15g-100g Ozone Generator | 卖方: Guangzhou Quanju Ozone Technology Co., Ltd | Quanju 15g-100g ozone generatorwith adjustable ozone output, suitable for small water treatment p... |
 |
DEUTZ TBD234 活塞，活塞环，排气阀 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司为国内外客户提供原厂及OEM厂生产的高速、中速、低速船用柴油机设备和备件，增压器、空压机、分油机、造水机、冰机、油泵、水泵、仪器仪表等。 我公司专业经营大发DAIHA... |
 |
供应原厂 DEUTZ TBD234,,604,616,620 柴油机配件 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司供应道依茨DEUTZ TBD234, TBD236, TBD604, TBD620, CHD622 活塞 活塞环 主轴瓦 连杆瓦 螺栓 螺钉 螺母 挺杆 进气阀 排气阀 阀... |
