HF RFID Module, Developed Based on NXP's Low Power Transponder ICs, Measures 38 x 38mm
Mini Mifare read/write module
Developed based on NXP's low power transponder ICs
Supports Ultralight, Mifare Mini, Mifare 1k, Mifare 4k and FM11RF08
Does auto real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level
In addition, it integrates all necessary components and antenna in one PCB
In view of its maximum working and sleep current are 45mA and 10uA respectively
It is preferential for applications which require low power cost
Features:
Interface: IIC for SL030 and UART for SL031
Frequency: 13.56MHz
Interface: I2C/UART
Supply voltages: 2.5 to 3.6V DC
Dimension: 38 x 38mm
Other supplier products
|
|
Easy-LF ID (TK4100 and EM4100 Compatible) Reader with 125kHz Frequency and USB Interface, Read Only |
Applications:
Widely used in internet cafes, member attendance, access control, property management, authentication and other places, with stable, ... |
|
|
UHF RFID Reader with Frequency Ranging from 840 to 960MHz and 0 to 10cm Reading Distance |
Frequency: 840 to 960MHz (UHF)
ESD: 4kV
Supports (EPC generation 2) full protocol
Compatibility indirect mode
Supports reading and writing
Support... |
|
|
EM4100 Low Frequency Passive RFID Disk Reader with Keyboard Emulation, Plug-and-Play |
Frequency: 125kHz
Protocol: EM4100 or compatible standard
Read 64 bits serial number
Embedded antenna
Reading range: 2 to 3cm
Output interface: USB... |
|
|
125kHz Passive RFID Desktop Reader, Can Read and Write Temic T5577 and EM4100 Format |
Power:
5mA (typical) standby
90mA (typical) field scanning
5V (typical) operation
Comply with 11784/85 protocol:
Supports TK4100, GK4100, EM4100 ... |
|
|
125kHz Passive RFID Desktop Reader, Can Read and Write EM4305 and ISO 11784/5 Format |
Power:
5mA (typical) standby
90mA (typical) field scanning
5V (typical) operation
Comply with 11784/85 protocol:
Supports TK4100, GK4100, EM4100... |
供应产品
Same products
