stability Low Voltage Switchgear
The Main Features
1、The cabinet frame is a combination structure, and the basic framework is assembled by c-shaped materials. All the structural parts of the cabinet frame are galvanized, and the door partition mounting bracket and bus function unit corresponding to the scheme change are assembled into a complete switch cabinet
2、is divided into three rooms, namely, horizontal bus room, drawer compartment, cable room and between the room with steel plate or high strength flame retardant plastic function plate separated from each other
3、The structural design of the cabinet can meet the requirements of various in-out schemes: upper path,upper-lower path, lower-upper path,and lower path
4、The structure has strong versatility and flexible assembly:With E=25mm as module, the structure and extractive units can be arbitrarily combined to meet the needs of system design
5、The busbar is protected by high strength, flame retardant, high insulating strength plastic function board, which has the function of anti-fault arc and makes the operation and maintenance safe and reliable
6、Various size drawer mechanical chain mechanism in accordance with the standard provisions, the connection test separation of three obvious positions, safe and reliable
7、Using high strength fire retardant engineering plastics, effectively strengthen the safety performance.
8、High degree of generalization and standardization, convenient assembly and reliable quality assurance
9、Cabinet can be selected according to the different requirements of the working environment corresponding protection level，Strong continuity and reliability of equipment protection
Introduction
can be widely used in all kinds of low-voltage power distribution systems such as power plant substation working condition enterprise building hotel municipal construction
Environmental conditions for product use
1、Ambient air should be no less than -5℃ at +40℃, and its average temperature should be no higher than +35℃ within 24 hours
2、The air is clean and the relative humidity is not more than 50% at the highest temperature +40℃ and 90% at the lower temperature, such as +20℃
3、Less than 2000m above sea level
4、No explosive gas, chemical corrosive gas, dust and violent vibration that can destroy the insulation, installation inclination shall not be more than 5 degrees
5、The device is suitable for transportation and storage in the following temperature ranges :-25℃ to +55℃, not exceeding +70℃ within a short time (24 hours)
6、When the above environmental conditions are exceeded, please consult with the manufacturer
Advantageof
MNS indoor electrical switchgear is compact in design, with smaller space to accommodate more functional units with strong versatility and flexible assembly
The design of cabinet put oneself in another's position is compact, the structure of strong commonality, standard modular design, safety and high technical performance, can make full use of the transformer room space, the drawer has five kinds of standard size, has reliable mechanical and electrical interlocking device, the state of the more obvious location.
Compact design: small space to accommodate more functional units
High degree of generalization and standardization, convenient assembly and reliable quality assurance.
More information can view .
在线联系供应商
Other supplier products
 |
FREQUENCY CONVERSION CABINET | ,safe Low Voltage Switchgear,GGJ Low Voltage Switchgear safe Low Voltage Switchgear GGJ Low Voltage Switchgear The Main Features 1、Frequency co... |
 |
combined Low Voltage Switchgear | The Main Features 1、High frequency switching power supply module as rectifier, modular design 2、The rectifier module adopts n+1 hot backup, and t... |
|
|
GCS LOW VOLTAGE SWITCHGEAR | ,convenient Low Voltage Electric Panel,practical Low Voltage Electric Panel convenient Low Voltage Electric Panel practical Low Voltage Electric ... |
|
|
HXGN66 MEDIUM VOLTAGE ELECTRICAL SWITCHGEAR | ,reliable Outdoor Prefabricated Substation,safe Outdoor Prefabricated Substation reliable Outdoor Prefabricated Substation safe Outdoor Prefabric... |
 |
substation Medium Voltage Electrical Switch gear | The Main Features Fully sealed and fully insulated structure, no insulation distance, reliable protection of personal safety. It can be used in b... |
Same products
 |
JXF Distribution Box | 卖方: Jiangsu Aokai Electric Co., Ltd | JXF Distribution Boxis a modular distribution box with advanced technology and performance introd... |
 |
XL Power Distribution Switchgear | 卖方: Jiangsu Aokai Electric Co., Ltd | XL-21 power distribution boxis suitable for ac 50 (60) HZ, voltage to 690V, power supply system, ... |
 |
Common Rail Injector Nozzle 880P119092 | 卖方: China lutong | Common Rail Injector Nozzle 880P119092 Common Rail Injector Nozzle A6510702887Chris Whats/ app:+... |
 |
Bently Nevada AC Power Supply PN 127610-01 of 3500/15 | 卖方: 840499 | 3500/15 127610-01 | Bently Nevada | 3500/15 交流电源模块（停产。新替代品：106M1079-01：通用交流电源模块）3500/15 127610-01... |
 |
隧道专用箱变 | 卖方: 839459 | 隧道专用箱变是针对在隧道环境中使用而专门设计的产品，针对隧道内湿度大，运行空间狭小等特殊性，该产品采用全密封双层隔温分体式箱体，配备凝露控制器与温度控制器，实现实时监控与自启动的功能，有效保证隧... |
