TXF-A Fiber Optic SMC Cabinet
GXF series optical cross-connection cabinet has four models: GXF-A GXF-B optical cross-connect cabinets. This series optical cross-connection cabinet is mainly made up of Stainless Steel or SMC case, fixing elements of the case frame, cable fixing and protective device, direct welding module, terminal module integrating welding and distributing, wiring duct and tail optical fiber coiling device.
The distribution oem smc fiber optic boxis suitable for the connection, distribution and dispatching of outdoor optical cableand optical distribution cable.
Details of TXF-A Fiber Optic SMC Cabinet
Size: 483*270*1Umm
Back look
Make by cold rolled sheet
Can install Simplex Adaptors or Duplex Adaptors
Customized size
Features of TXF-A Fiber Optic SMC Cabinet
Large capacity: the maximum distribution capacity is 96-cores, 144-cores, 288-cores, and 576-cores four types of optical fiber cables, and the capacity of direct welding is single, 120-cores -240-cores, and 240 cores -480-cores ribbon optical fiber cables.
The cabinet adopts special high-strength corrosion-resistant materials, has good waterproof, anti-condensing, moisture resistance properties, and can stand various adverse effects caused by climate and environment.
The fiber to the cabinetis equipped with horizontal wiring duct, and makes the optical cable layout more reasonable and tidy.
Adopts the terminal tray integrating welding and distributing. Welding and distributing are performed at the same level, which makes the operation convenient, reduces the length of ribbon tail fiber and lowers the cost.
The terminal module adopts the horizontal draw-out structure with 12 cores as a unit, each core can be drawn out separately, which makes it convenient to operate in distributing, and reduces the number of bends arising from the distributing of tail fiber.
The optical fiber splitter is structurally reasonable, the optical fiber cable core is sheathed with sleeve, and the fixing, grounding and other operation on optical fiber cable can be performed, without removing the optical fiber splitter.
Specification of TXF-A Fiber Optic SMC Cabinet
Working temperature: ―5℃～+40℃ (indoor), ―40℃～+60℃ (outdoor)
Relative humidity: ≦85% (at +30℃) (indoor), ≦95% (at +40℃) (outdoor)
Atmospheric pressure: 70kPa～106kPa
The insertion loss does not exceed 0.5dB.
Return loss: that of APC type is not less than 60dB, that of UPC is not less than 50dB, and that of PC type is not less than 40dB.
Voltage withstand level
The voltage withstand level between the grounding device and the metal part of terminal ftth box is not less than 3000V (DC) within 1min.
The high-voltage protective grounding is connected with the metallic strength member, metallic moisture-blocking layer and the armor layer in the optical cable, and the sectional area of ground wire exceeds 6mm2.
Insulation resistance
The insulation resistance between the grounding device and the metal part of box is not less than 2×104mΩ,and the test voltage is DC500V.
The optical fiber cables shall conform to Standard GB/T7424 and GB/T11819.
The nominal operating wavelength is 1310nm, 1550nm.
The cabinet appearance can stand at least 980N of pressure vertical to the appearance. After the cabinet door is opened, it can stand at least 200N pressure from the most outer end of the door.
The cabinet is in locked state. The protection performance of indoor equipment can reach the requirements of IP53 as specified in GB4205, and that of outdoor type can reach the requirements of IP65 as specified in GB4208.
As a fiber optic products supplier in the world, TUOLIMAhas been operating in the optical communication industry since 2009, mainly fabricating and selling various fiber optic cable and cable fittings, fiber optic splice closures, distribution boxes with all accessories, FTTH transmission equipment. Our goal is to provide domestic and foreign customers with innovative telecommunicationsequipment and FTTH solutions that meet international standards so as to become one of the most famous and best fiber optic accessories suppliers in the world.
在线联系供应商
Other supplier products
 |
GYTA / GYTS Fiber Optic Cable | The structure of GYTA cableis that single-mode or multi-mode optical fiber is sheathed in a loose tube made of high modulus polyester material, and... |
 |
TLM5002A Tool Clean Kits | The 5002A Deluxe Fiber Optic Cleaning Kits are solutions for fiber construction and daily cleaning and maintenance. Fiber optic kit tools for cl... |
 |
Fish Fiber Optic Drop Cable Clamp | FISH fiber optic drop cable clamp is the tension clamp for FTTH drop cable clamp. It is a plastic&metal FTTH drop clamp. Fish clamp FTTH can... |
 |
LC Duplex Adapter | A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cableor fiber optic connect... |
 |
A Type Fiber Optic Fast Connector | The quick SC / APC fastconnectorincorporates a new disposable wedge tool system, eliminating the need for specialized expansion tools. SC/ APC f... |
Same products
 |
48V 230VAC 5000W SOLAR INVERTER CHARGER (500VOC) | 卖方: Suzhou Cosuper Energy Technology Co., Ltd | The Cosuper SPE5000S solar inverter charger is a combination of solar charger, battery inverter a... |
 |
1*8 Card-Type Fiber Optic Splitter | 卖方: Hangzhou Tuolima Network Technologies Co., Ltd | Optical splitter is a part of passive components (also called optical passive components) in the ... |
 |
1*4 Mini Fiber Optic PLC Splitter | 卖方: Hangzhou Tuolima Network Technologies Co., Ltd | 1 4 fiber optic splitteris a part of passive components (also called optical passive components) ... |
 |
1*4 Card-Type Fiber Optic Splitter | 卖方: Hangzhou Tuolima Network Technologies Co., Ltd | Optical splitter is a part of passive components (also called optical passive components) in the ... |
 |
1*2 Mini Fiber Optic Splitter | 卖方: Hangzhou Tuolima Network Technologies Co., Ltd | Optical splitter is a part of passive components (also called optical passive components) in the ... |
