cyclone dust collector for power plant
Introduction:
The CLP-B type cyclone dust collector can be used either alone or in combination with multiple cylinders. It is connected by a common gas inlet
and outlet gas cylinder to satisfy any smoke volume treatment. The unit of each dust collector has four parts: body, volute, core tube and sealed
dust collection device with good performance.
The working principle of the CLP-B cyclone dust collector after adding the bypass is that the dust-laden gas enters the tangential direction from
the entrance. When the air flow obtains the rotating motion, the air flow is separated from the upper and the lower to form a double-scroll
cochlear motion. The dust is in the double-scroll There is a strong separation effect at the boundary. The coarser dust particles are separated to
the outer wall with the down spiral vortex flow. Part of the dust is led out from the central hole of the bypass separation chamber, and the
remaining dust is carried by the downdraft. The upper vortex air flow has aggregating effect on fine-grained dust, thereby improving the dust
removal efficiency. This part of the finer dust particles, from the upper spiral vortex to the upper part, forms a strongly rotating upper dust ring
under the top cover, and enters the upper hole of the bypass separation chamber together with the upper spiral worm gas flow, and is introduced
into the cone through the return air inlet. With the internal air flow, the purified gas is discharged from the exhaust pipe, and the separated dust
enters the hopper.
Structure size:
1. The size of the exhaust pipe The depth of the exhaust pipe should be at the interface between the upper and lower air swirlers. Exhaust pipe
insertion depth and dust removal efficiency. The depth of insertion is about 1/3 of the height of the intake day; and it has nothing to do with the
type of dust, the particle size distribution, and the inlet gas velocity. The deeper the insertion depth of the exhaust pipe, the greater the pressure
loss.
2. Bypass Separation Chamber Side Separation Separation The top side seam of the bypass chamber introduces the upper vortex gas flow into
the bypass separation chamber. The cone side seam introduces the dust ring formed by the lower spiral in the upper cone into the bypass
separation chamber. The height of the side seam is generally the distance from the top edge of the inlet to the top cover.
If you need, please feel free to contact Miss. Livia
在线联系供应商
Other supplier products
 |
Selected Materials Waste Tire Building To Oil Pyrolysis Machine | Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil... |
 |
Flange connection Y type strainer for water treatment | INTRODUCTION:Y type strainer is usually used at the inlet end of reducing valve, decompression valve, level control valve and other equipment to cl... |
 |
replacement EPE lube oil filter cartridge 1.060G20-000-6-P for Metallurgical Refinery | replacement EPE lube oil filter cartridge 1.060G20-000-6-P for Metallurgical Refinery Introduction: EPE filter element is widely used in the hydrau... |
|
|
EPE filter elements 1.0063G100-A00-0-P | EPE filter elements1.0063G100-A00-0-P Introduction: EPE filter element is widely used in the hydraulic system and lubricant system to filter th... |
 |
Facet CAA14-5 Coalescer Filter Element Cartridge Replace | INTRODUCTION: Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges... |
Same products
 |
Three-Phase Hybrid Inverter SP1S-3P-H (3-15kW) | 卖方: Shanghai Sunplus New Energy Technology Co., Ltd | The Sunplus Three-Phase Hybrid Inverter 3-15kW seriesis engineered to provide advanced energy man... |
 |
Residential Hybrid Energy Inverter SP1S-1P-L Series (3-6kW) | 卖方: Shanghai Sunplus New Energy Technology Co., Ltd | The Sunplus Residential Hybrid Energy Inverter SP1S-1P-L Series(3-6kW) is designed to enhance the... |
 |
AIFEN 3310 PRO 专业直流电源站，适用于手机维修 | 卖方: Phonefix | AIFEN 3310 PRO 是一款 330W 直流电源，专为手机硬件维护而设计。这款高精度开关电源提供 33V 10A 可调输出，为高级智能手机主板诊断和维修提供所需的稳定性和功率。 产品特... |
 |
HP PRO-T Series High Frequency Inverter | 卖方: Beijing Yi Jia International Trading Co., Ltd | High-frequency, high power density, high efficiency, and low no-load loss. HP PRO-T Series High ... |
 |
MNS Low Voltage Draw | 卖方: Hebei Tongdian Electric Equipment Technology Co., LTD | MNS Low Voltage Draw-Out SwitchgearSystem of new modular and modularized design Main circuit sch... |
