DO Signal (SIS) Input 24V DC 5A Safety Relay
These safety relay are suitable for the application of E-Stop button, safety gate and DO signal from SIS, with several contacts output.
The emergency stop safety relay can be operated in single or double channel mode, manual or automatic reset, and with the function of monitoring the short circuit between channels.
Features & Advantages of DO Signal (SIS) Input 24V DC 5A Safety Relay
Several contacts output
Low start-up inrush current
Parameter of DO SIS SignalInput 24V DC 5A Safety Relay
|
CZSR8001-3A1B |
CZSR8001-2A2B |
|
|
Supply voltage |
24V DC |
24V DC |
|
Voltage tolerance |
||
|
Current consumption |
≤90mA (24V DC) |
≤90mA (24V DC) |
|
Input current |
≤50mA (24V DC) |
≤50mA (24V DC) |
|
Cable resistance |
≤15Ω |
≤15Ω |
|
Input devices |
DO signals |
DO signals |
|
Number of contacts |
3NO+1NC |
2NO+2NC |
|
Contact material |
AgSnO2 + 0.2 µm Au |
AgSnO2 + 0.2 µm Au |
|
External contact fuse protection |
10A gL/gG NEOZED (NO); |
10A gL/gG NEOZED (NO); |
|
6A gL/gG NEOZED (NC) |
6A gL/gG NEOZED (NC) |
|
|
Utilisation category |
In accordance with EN60947-5-1: |
In accordance with EN60947-5-1: |
|
AC-15, 5A/230V; DC-13, 5A/24V |
AC-15, 5A/230V; DC-13, 5A/24V |
|
|
Switch-on delay |
≤300ms |
≤300ms |
|
Delay-on de-energisation |
≤30ms |
≤30ms |
|
Recovery time |
≤100ms |
≤100ms |
|
Supply short interruption |
20ms |
20ms |
|
EMC |
EN60947, EN61000-6-2, EN61000-6-4 |
EN60947, EN61000-6-2, EN61000-6-4 |
|
Vibration |
Vibration frequency: 10Hz~55Hz; |
Vibration frequency: 10Hz~55Hz; |
|
Vibration amplitude: 0.35mm |
Vibration amplitude: 0.35mm |
|
|
Ambient temperature |
-20℃~+60℃ |
-20℃~+60℃ |
|
Storage temperature |
-40℃~+85℃ |
-40℃~+85℃ |
|
Relative humidity |
10%~90% |
10%~90% |
|
Overvoltage category |
Ⅲ |
Ⅲ |
|
Pollution degree |
2 |
2 |
|
Rated insulation voltage |
250V AC |
250V AC |
|
Rated impulse voltage |
6000V (1.2/50us) |
6000V (1.2/50us) |
|
Dielectric strength |
1500V AC, 1min |
1500V AC, 1min |
|
Clearance and creepage distance |
In accordance with EN 60947-1 |
In accordance with EN 60947-1 |
|
Safety integrity level |
SIL3 |
SIL3 |
|
Performance level |
PLe |
PLe |
|
Category |
If you want buy a high quality dc power surge protector, please choose Chenzhu!
在线联系供应商
Other supplier products
 |
Intrinsic Isolated Barrier | Intrinsic Isolated Barrier Intrinsically safe electrical equipmentand isolators use intrinsically safe explosion-proof and functional safety techn... |
 |
CZ3000 Temperature Converter Signal Conditioner | CZ3000 Temperature Signal Conditioner Thermal resistance type signal isolators,the two-wire or three-wire system resistance signal is converted in... |
 |
Details to Pay Attention to in Signal Isolators | What Is Signal Isolator? Ⅰ. Introduction of signal isolators Signal isolator adopts a linear optocoupler isolation principle that converts inpu... |
 |
Power Transmitter | Power transmittercan transfer complicated current like 0~1A/0~5A/0~10A into industry-standard output, adopting the true RMS detection technology. W... |
 |
Safety Relay | SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in safety and automation system. We have over 24 years of exp... |
Same products
 |
Propane Refill Adapter | 卖方: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. Raw Material: High solid brass;2. Inlet: QCC; Outlet: 1"-20 Female throw... |
 |
SUNLORD inductor 10UH 20% 7.8A 10 x 11.5 x 4MM instead IHLP4040DZER100M01 FIXO 10UH 6.8A 36.5 MOHM | 卖方: ZK Electronic Technology Co., Limited | Part name: 10UH 20% 7.8A 10 x 11.5 x 4MM Description:SUNLORD inductor 10UH 20% 7.8A 10 x 11.5 x ... |
 |
SRR1240-680M INDUTOR POWER 68UH 1.5A SMD BOURNS | 卖方: ZK Electronic Technology Co., Limited | Part name: SRR1240-680M Description:SRR1240-680M INDUTOR POWER 68UH 1.5A SMD BOURNS Inductance:... |
 |
SMD Common Mode Inductor ACM7060-701-2PL-TL01 ACM7060 TDK | 卖方: ZK Electronic Technology Co., Limited | Part name: ACM7060-701-2PL-TL Description:SMD Common Mode Inductor ACM7060-701-2PL-TL01 ACM7060 ... |
 |
Inductor beads BLM15AG121SN1D MURATA SMD | 卖方: ZK Electronic Technology Co., Limited | Part name: BLM15AG121SN1D Description:Inductor beads BLM15AG121SN1D MURATA SMD Inductance: / C... |
