Copper Wire Bunching Machine 630
1-Application:
Wire winding road of Copper Wire Bunching Machine 630is from the pay-off device through the disconnection sensing area, first pass through the main distribution board (the distribution holes are distributed according to 1+6+12+...), pass through the first line of pressure die, and then pass through the second line of pressure die, Finally enter the thread guide wheel in the right main shaft. After passing the aluminum plate bow with the porcelain ring, it enters the thread guide wheel in the left main shaft, and then passes through the center corner guide wheel to the take-up wheel, and reaches the upper guide wheel of the aligner for traversing.
2-Main feature:
(1) Max.Finished Twisting Section Area: 6.0m m2.(2) Max speed: 1800 r/min(3) Raw material: copper wire, tin coated wire,copper cladding aluminum wires, silver plated copper wires etc(4) Twisting type: double twist
3-Parameters:
|
Machine type |
SY-630P |
|
1800r/min |
|
|
Inlet individual dia. |
|
|
Standard lay length |
|
|
Standing section area |
|
|
Twisting direction |
right or left |
|
Spool dimension |
MAX 630mm |
|
Bobbin loading, unloading type |
Manual hydraulic pressure |
|
Main motor |
|
|
M/C Dimension |
2900mmL*1500mmW*1650mmH |
|
Coating |
Sky blue(or according to customers requirements) |
|
Pay-off |
It can be vertical passive type or 630 steel spool multi wire type |
4-Advantages:
(1) More stability, high production efficiency, low noise and easy to operation.(2)Spring bow can prolong the life.(3)Take-up tension is controlled by magnetic powder clutch or mechanical type.(4) If the wire breaks, the machine can stop automatically.
在线联系供应商
Other supplier products
 |
Super Fine Wire Drawing Machine | Application: This machine is special used for drawing wire 0.04-0.15mm. Finished wire is wound by plastic bobbin. Main feature: Adoptin... |
 |
Intermediate Wire Drawing Machine with Online Annealing | Application:Intermediate Copper Wire Drawing Machine with Annealeris used for drawing and annealing copper wire from 3.0mm to 0.4-1.6mm.Outlet wire... |
 |
Individual Driver Controlled Rod Breakdown Machine | 1-Application: Rod Breakdown Machine with Individual Drives is used for drawing copper and aluminum or alloy wire with high speed. 2-Main feature... |
|
|
Copper Wire Bunching Machine 630 | 1-Application: Wire winding road of Copper Wire Bunching Machine 630is from the pay-off device through the disconnection sensing area, first pass ... |
Same products
 |
Fast and Effective Solder Removal for Electronics | 卖方: 深圳市维客修科技有限公司 | WYLIE 3M 除焊芯 2.0mm 2.5mm 3.0mm 3.5mm 3.0M 焊锡丝采用拇指轮分配器和不锈钢嘴设计，适用于手机主板、电子电路板、CPU BGA芯片、锡清洗焊接维修。残留物少... |
|
|
Copper Wire Bunching Machine 630 | 卖方: 张家港胜友机械有限公司 | 1-Application: Wire winding road of Copper Wire Bunching Machine 630is from the pay-off device t... |
|
|
Individual Driver Controlled Rod Breakdown Machine | 卖方: 张家港胜友机械有限公司 | 1-Application: Rod Breakdown Machine with Individual Drives is used for drawing copper and alumi... |
|
|
Intermediate Wire Drawing Machine with Online Annealing | 卖方: 张家港胜友机械有限公司 | Application:Intermediate Copper Wire Drawing Machine with Annealeris used for drawing and anneali... |
|
|
Super Fine Wire Drawing Machine | 卖方: 张家港胜友机械有限公司 | Application: This machine is special used for drawing wire 0.04-0.15mm. Finished wire is wo... |
