C Class Amplifier
Features and applications:Mature technical design provide consistent reliability and quality of the soundMature circuit provide low distortion and super high dynamic range2u and 3u height provide the ability to operate in conditions of low impedance or high impedance High efficiency of cooling by Ventilation tunnel for heat spread provide long duration working under high powerScientific reasonable layout reduce feedback enormously and provide consistent stability and ability for anti-disturbanceSmart dynamic limiting system provide safe operating environmentStrict selection of spare parts and strict uniformity of productsModel:C12Stereo Power 400WStereo Power 600WBridge Power 1200WFreq.Resp(+0/-0.31W/8) 20Hz-20KHz,Website: <0.03%Slew Rate 30V/sDAMPING Factor 400S/N Ratio >95dBInput sensitivity 0.775V,1V,1.4VInput imped.(bal/unbal.) 20K/10KProtection overheat,short circuits,DC,limit and soft-start,OutputRelay-Zero Current Switch,intellectual Clip Limiter.Segregation ratio >70dBGross Weight19kgDimensions 585MM 580MM 160MMModel:C18Stereo Power 550W4Stereo Power 825WBridge Power 1650WFreq.Resp(+0/-0.31W/8) 20Hz-20KHz,-3dB@100KHzTHD+N <0.03%Slew Rate 30V/sDAMPING Factor 400S/N Ratio >95dBInput sensitivity 0.775V,1V,1.4VInput imped.(bal/unbal.) 20K/10KProtection overheat,short circuits,DC,limit and soft-start,OutputRelay-Zero Current Switch,intellectual Clip Limiter.Segregation ratio >70dBGross Weight 21kgDimensions 585MM 580MM 160MMModel:C24Stereo Power 800WStereo Power 1200WBridge Power 2400WFreq.Resp(+0/-0.31W/8) 20Hz-20KHz(+0/-0.5dB)THD+N <0.03%Slew Rate 44V/sDAMPING Factor 300S/N Ratio >95dBInput sensitivity 0.775V,1V,1.4VInput imped.(bal/unbal.) 20K/10KProtection overheat,short circuits,DC,limit and soft-start,OutputRelay-Zero Current Switch,intellectual Clip Limiter.Segregation ratio >70dBGross Weight 31.5kgDimensions 660MM 590MM 230MMModel:C32Stereo Power 1000WStereo Power 1500WBridge Power 3000WFreq.Resp(+0/-0.31W/8) 20Hz-20KHz(+0/-0.5dB)THD+N <0.03%Slew Rate 44V/sDAMPING Factor 300S/N Ratio >95dBInput sensitivity 0.775V,1V,1.4VInput imped.(bal/unbal.) 20K/10KProtection overheat,short circuits,DC,limit and soft-start,OutputRelay-Zero Current Switch,intellectual Clip Limiter.Segregation ratio >70dBGross Weight 33.5kgDimensions 660MM 590MM 230MMModel:C368Stereo Power 1200W4Stereo Power 1800W8 Bridge Power 3600WFreq.Resp(+0/-0.31W/8) 20Hz-20KHz(+0/-0.5dB)THD+N <0.03%Slew Rate 44V/sDAMPING Factor 300S/N Ratio >95dBInput sensitivity 0.775V,1V,1.4VInput imped.(bal/unbal.) 20K/10KProtection overheat,short circuits,DC,limit and soft-start,OutputRelay-Zero Current Switch,intellectual Clip Limiter.Segregation ratio >70dBGross Weight 34.5kgDimensions 660MM 590MM 230MM
Other supplier products
|
|
Features and applications:By adopting high power drivers and precise design coordinated with integrated formation line array bugle, the speakers fe... |
|
|
Features:Small size but tidy and beautifulClean sound can display and restore original voiceEasy handling for installation. It may be mounted in wa... |
|
|
Features:The passive design provide strong power and good frequency responseSuspension point and rack available for suspension and mountingVersatil... |
|
|
Features:Sample frequency 192KHZ,Website:, 32-bit DSP chip,24-bit A/D and D/A conversionFlexible matrix of crossover mode by H-cut,L-cut,M-cut,ban... |
|
|
Features and applications:*Integrated formation bugle*Easy and safe suspension device*Fast floor stacking or mounting*Ergonomic knob*Built-in DSP a... |
供应产品
Same products