12V AGM Sealed Lead Acid
SpecificationsNominal Voltage12VCapacity77°F(25℃)20HR(10.8V)17Ah10HR(10.5V)15.8Ah1HR(9.60V)11.1AhDimensionLength181±2mm (7.13inch)Width77±2mm (3.03inch)Height167±2mm (6.57inch)Total Height167±2mm (6.57inch)Approx. Weight5.1kg (11.2lbs)±4%Terminal typeT3/T8Terminal materialCopperInternal resistanceFully charged 77°F/25℃Approx. 17mΩCapacityaffected by temperature(10HR)104℉ (40℃)102%77 ℉ (25℃)100%32 ℉ (10℃)85%5 ℉ (-15℃)65%Operatingtemperaturerange3 monthsRemaining Capacity: 91%6 monthsRemaining Capacity: 82%12 monthsRemaining Capacity: 65%Nominal operating temperature77℉±5℉(25℃±3℃)OperatingtemperaturerangeDischarge5℉～122℉(-15℃～50℃)Charge14℉～122℉(-10℃～50℃)Storage-4℉～122℉(-20℃～50℃)Float charging voltage(25℃)13.50 to 13.80VTemperature compensation: -18mV/℃Cyclic charging voltage(25℃)14.50 to 14.90VTemperature compensation: -30mV/℃Maximum charging current5.1AMaximum discharge current225A(5 sec.)Designed floating life(20℃)7~10 years◆ Absorbent glass mat technology;◆ Recognized by UL & CE;◆ ABS container.DimensionsDischarge Constant Current (Amperes at 77℉ 25℃)F.V/Time10min15min30min60min2h3h4h5h8h10h20h9.60V40.832.318.011.16.044.343.472.851.911.600.869.90V39.631.517.710.96.004.313.452.931.901.600.8610.2V37.930.417.110.65.954.283.422.911.881.590.8610.5V36.329.316.710.45.864.253.402.891.871.580.8510.8V34.327.816.110.15.714.123.302.801.811.550.83Discharge Constant Power (Watts at 77℉ 25℃)F.V/Time10min15min30min60min2h3h4h5h8h10h20h9.60V.751.541.335.222.919.310.49.90V.251.241.135.022.819.210.310.2V.650.840.834.722.619.110.310.5V.650.540.534.522.419.010.210.8V.849.039.333.521.818.610.0(Note)The above characteristics data are average values obtained within three charge/discharge cycles not the minimum values.
Other supplier products
|
|
|
NP38-12 (12V38Ah/10hr)The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and ... |
|
|
|
NPD100-12(12V100Ah/10hr) TThe rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators ... |
|
|
|
NP10-6(6V10Ah)GENERAL FEATURES●Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom form electrolyte for ... |
|
|
|
LEADHOO is one of the professional 12v/40ah mf recharge agm battery solar manufacturers and suppliers in China which can offer you bulk 12v/40ah m... |
|
|
|
SpecificationsCapacity(25℃)10 hour rate (1.80V)100Ah3 hour rate (1.75V)76.5Ah1 hour rate (1.75V)56.5AhDimensionLength171±2mm (6.73inch)Width72±1mm ... |
供应产品
Same products
