12V AGM Battery Backup
NP1.3-12 (12V1.3Ah/20hr) The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and thus immobilized.Should the battery be accidentally overcharged producing bydrogen and oxygen, Special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position.Battery ConstructionComponentPositive plateNegative plateContainerCoverSafety ValveTerminalSeparatorElectrolyteRaw materialLead DioxideLeadABSABSRubberCopperFiberglassSulfuric AcidGeneral Feature●Absorbent Glass Mat(AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding.●Not restricted for air transport-complies with IATA/ICAO Special Provision A67.●UL-recognized component.●Can be mounted in any orientation. Computer designed lead, calcium tin alloy grid for high power density.●Long service life, float or cyclic applications.●Maintenance-free operation.●Low self discharge.SPECIFICATIONNominal voltageVNumber of cell 6Length(mm/inch 97/3.82Width(mm/inch) 43/1.69Height(mm/inch 52/2.01 Total Height(mm/inch) 58/2.28 Approx. Weight(kg/lbs) 0.56/1.23Performance CharacteristicsCapacity77°F(25℃)20 hour rate (0.06A, 10.8V )1.3Ah10 hour rate (0.115A, 10.5V)1.15Ah5 hour rate (0.22A, 10.5V)1.1Ah1 hour rate (5.8A, 9.6V)0.81AhInternal ResistanceFull charged Battery 77°F(25℃): 120mΩCapacity affected byTemperature(20hour rate)104℉ (40℃)102%77 ℉ (25℃)100%32 ℉ (10℃)85%5 ℉ (-15℃)65%Self-discharge68℉ (20℃)Capacity after 3 months storage90%Capacity after 6 months storage80%Capacity after 12 months storage60%Max. discharge current77℉(25℃): 18A(5S)Charge(ConstantVoltage)Float: 13.6~13.8V / 77℉(25℃)Cycle: 14.50~14.90V / 77℉(25℃)Max. Current：0.3ADischarge Constant Current (Amperes at 77℉ 25℃)End Point Vlots/Cell5min10min15min30min1h3h5h10h20h1.60V5.203.502.431.350.810.350.240.1260.0771.65V4.933.333.321.300.780.340.230.1230.061.70V4.653.162.211.240.750.330.230.1180.061.75V4.362.982.101.180.720.310.220.1150.061.80V4.072.801.981.120.690.300.210.1130.06Discharge Constant Power (Watts at 77℉ 25℃)End Point Vlots/Cell5min10min15min30min45min1h2h3h5h1.60V9.005.674.672.672.071.630.880.660.481.65V8.445.344.412.531.971.560.850.650.471.70V7.885.014.162.401.871.490.810.630.461.75V7.334.683.902.261.771.420.760.610.451.80V6.794.353.642.121.671.340.710.600.44(Note)The above characteristics data are average values obtained within three charge/discharge cycles not the minimum values.
Other supplier products
|
|
|
LEADHOO is one of the professional 2v2000ah deep cycle tubular gel battery manufacturers and suppliers in China which can offer you bulk 2v2000ah d... |
|
|
|
NPG70-12(12V70Ah/10hr） NPG series is GEL battery which is manufactured with AGM separator and colloidal Silicon. Gel battery are featured with low ... |
|
|
|
SpecificationsNominal Voltage12VCapacity77°F/25℃10HR(10.8V)100Ah5HR(10.5V)87Ah1HR(9.60V)62AhDimensionLength330±2mm (12.99inch)Width171±2mm (6.73inc... |
|
|
|
OPzS2800 (2V800Ah)Leadhoo OPzS series is a flooded Lead Acid battery that adopts Tubular Plate technology to offer high reliability and performanc... |
|
|
|
LEADHOO is one of the professional 12v38ah 12v agm inverter battery manufacturers and suppliers in China which can offer you bulk sealed lead acid ... |
供应产品
Same products
