High precision multilayer piezoelectric actuator for CCD anti-shake
piezoelectric actuator、CCD anti-shake、multilayer piezo creamic
Type：PSt100/1.65*1.65/5
Material Properties
Material: PZT(PZT5H)
- εref: 5400
Loss factor: 200×10-4
Coupling factor: KP=0.62, K31=0.34, K33=0.68
Piezo coefficient: d31=-290pm/V, d33=+635pm/V
- S33E=18.1×10-12m²/N, S11E=14.8×10-12m²/N
Frequency constant: Radial=2040m/sec, Thickness=1800m/sec,
Transverse=1410m/sec,
Longitudinal=1370m/sec
Quality factor(resonance): 70
Density: 8g/cm³
Curie temperature: 150°C
Specific heat: 380Ws/°K kg
Thermal conductivity: ca.1.5 Ws/m·K(axial direction)
Above-mentioned parameters can vary significantly with the
operating electrical field strength.
Temperature
Operating temperature: -50~+100°C(according to resin). If >100°C, PZT performance will be reduced reversibly Above Curie temperature, piezo actuators will be permanently depolarized.
Technical data
- [μm]±15%：4/3.2
- [μF]±20%：0.090
Stiffness [N/μm]±20%：30
Resonant frequency [kHz]±20%：50
Blocking Force [N]：120
Mass [g]±5%：0.48
在线联系供应商
Other supplier products
 |
封装式压电陶瓷促动器 | 低压柱形压电陶瓷促动器是通过将低压压电陶瓷叠堆封装与内部，外部由柱形不锈钢外壳保护，并通过机械外壳对压电陶瓷叠堆施加预紧力，较高的内部机械预载力可适用于高负载、高动态应用。它可输出压电陶瓷叠堆产生的位移及出力，且可承受一定的拉力。 |
 |
Piezo stack actuator with preload 150V driving voltage for precision grind | Low-voltage piezo actuator is preloaded low-voltage piezo stack inside, and the outside is protected by a cylindricalstainless steel shell. The pre... |
 |
Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine | According to the requirements of automatic wire bonding machine, CoreMorrow produces piezo clamp, which is designed and developed for clamping wire... |
 |
Modular Piezo Controller Custom Piezo Actuator Driver Circuit Controller-CoreMorrow | Piezo controllers are used to drive and control piezoelectric ceramics and nano positioning stages. They are mainly divided into modular, integrate... |
 |
Piezo actuator with preload optional transfer mode closed loop SGS sensor | Low-voltage piezo actuator is preloaded low-voltage piezo stack inside, and the outside is protected by a cylindricalstainless steel shell. The pre... |
Same products
 |
China factory Signal control board DK-MCJ3004 for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Signal control board DK-MCJ3004 for power station Sold by YOYIK. Deyang YOYIK is a... |
 |
Made in China Signal board 6ES7288-5CM01-0AA0 for thermal power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Signal board 6ES7288-5CM01-0AA0 for thermal power plant Selection of advanced tech... |
 |
China made Small machine dual LVDT sensor TDZ-1 for power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Small machine dual LVDT sensor TDZ-1 for power plant Deyang YOYIK is a strong technic... |
 |
Linear displacement sensor 181.36.06.G02 power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier Linear displacement sensor 181.36.06.G02 power plant spare parts Main: hydraulic ... |
 |
China factory Limit switch DE Ll LX918-11L for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China factory Limit switch DE Ll LX918-11L for power station YOYIK is a research and development,... |
