Piezo ceramic ring stack blocking force to 8000N low power consumption
Piezo ceramic ring stack、low power consumption、blocking force to 8000N
Type：HPSt150/20-15/x
Material Properties
Material: PZT(PZT5H)
- εref: 5400
Loss factor: 200×10-4
Coupling factor: KP=0.62, K31=0.34, K33=0.68
Piezo coefficient: d31=-290pm/V, d33=+635pm/V
- S33E=18.1×10-12m²/N, S11E=14.8×10-12m²/N
Frequency constant: Radial=2040m/sec, Thickness=1800m/sec,
Transverse=1410m/sec,
Longitudinal=1370m/sec
Quality factor(resonance): 70
Density: 8g/cm³
Curie temperature: 150°C
Specific heat: 380Ws/°K kg
Thermal conductivity: ca.1.5 Ws/m·K(axial direction)
Above-mentioned parameters can vary significantly with the
operating electrical field strength.
Temperature
Operating temperature: -50~+100°C(according to resin). If >100°C, PZT performance will be reduced reversibly Above Curie temperature, piezo actuators will be permanently depolarized.
Technical data
Eg：HPSt150/20-15/25
- [μm]±15%：32/25
- [μF]±20%：10
Stiffness [N/μm]±20%：230
Resonant frequency [kHz]±20%：22
Blocking Force [N]：8000
在线联系供应商
Other supplier products
 |
H01 Piezo Expanted Actuators 80um Fiber Stretcher 1.5kHz | H01 piezo fiber stretcher is designed for fiber stretching applications. Its principle is to cause the hinge structure outward expansion by the act... |
 |
P76 Large Loading Z Scanner Micro Piezo Actuator for Total Station Piezoelectric Laser Scanner | P76 series piezoelectric objective scanner features a large load capacity up to 500g, Z-axis linear motion range up to 200μm, adopting flexible ... |
 |
High dynamic multilayer PZT piezoelectric ceramic actuators Nanopostioning | PZT piezoelectric ceramic actuators,High dynamic,Nano postioning Type:PSt150/10*10/x Material Properties Material:PZT(PZT5H) εref... |
 |
Modular Piezo Controller Custom Piezo Actuator Driver Circuit Controller-CoreMorrow | Piezo controllers are used to drive and control piezoelectric ceramics and nano positioning stages. They are mainly divided into modular, integrate... |
 |
Piezo stack actuator with preload 150V driving voltage for precision grind | Low-voltage piezo actuator is preloaded low-voltage piezo stack inside, and the outside is protected by a cylindricalstainless steel shell. The pre... |
