Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine
According to the requirements of automatic wire bonding machine, CoreMorrow produces piezo clamp, which is designed and developed for clamping wire. It feaures a simple structure, fast response and high resolution. Characteristics • Displacement to 100μm • Sub-millisecond response time • Resonant frequency to 1.5kHz • Small size Principle The structure of piezo clamp is composed of piezo stack, flexible mechanical structure, fixed jaw and adjustable jaw. Piezo stack is installed between clamping jaw and the base. When voltage is applied to piezo stack, the output displacement of the piezo stack is amplified by the lever arm of the clamping jaw and outputed in the top end of the closed. After the voltage is removed, the of clamp jaws return to initial position. Technical Data Type:XD002.90K Active axes:X Travel range(0~120V): ±40 µm±20% Travel range(0~150V): ±50 µm±20% Push/pull force capacity: 10/1 N Stiffness: 0.04 N/μm±20% Unloaded resonant frequency: 1500 Hz±20% Unloaded step time: 0.7 ms±20% Unloaded operating frequency: 300 Hz Load capacity: 0.05kg El. Capacitance: 0.18μF±20% Material: Steel Mass: 10 g±5% Power-on jaw status: Open Type:XD002.150K Active axes:X Travel range(0~120V): ±60 µm±20% Travel range(0~150V): ±75 µm±20% Unloaded resonant frequency: 1100 Hz±20% Load capacity: 0.05kg El. Capacitance: 0.17μF±20% Material: Steel Mass: 8.7 g±5% Power-on jaw status: Open Type:XD002.200S Active axes:X Travel range(0~120V): ±80 µm±20% Travel range(0~150V): ±100 µm±20% Push/pull force capacity: 4/- N Stiffness: 0.04 N/μm±20% Unloaded resonant frequency: 400 Hz±20% Load capacity: 0.05kg El. Capacitance: 7.2μF±20% Material: Steel Mass: 305 g±5% Power-on jaw status: Close
在线联系供应商
Other supplier products
 |
Preload piezo actuators 40kHz frequency open/closed loop | Low-voltage piezo actuator is preloaded low-voltage piezo stack inside, and the outside is protected by a cylindricalstainless steel shell. The pre... |
|
|
Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine | According to the requirements of automatic wire bonding machine, CoreMorrow produces piezo clamp, which is designed and developed for clamping wire... |
 |
Modular Piezo Controller Custom Piezo Actuator Driver Circuit Controller-CoreMorrow | Piezo controllers are used to drive and control piezoelectric ceramics and nano positioning stages. They are mainly divided into modular, integrate... |
 |
Laser Piezo Objective Scanner Micro Piezo Actuator Z Axis Piezoelectric Linear Stage Micrometer | P72 piezoelectric objective scanner is aZ-axis motion piezo positioner specially designed for objective lens focusing microscopy. It adopts africti... |
 |
High Accuracy Piezo Actuator PZT for optical fiber stretch | Piezo Actuator PZT,optical fiber stretch,High Accuracy Type:PSt150/14*14/20 Material Properties Material: PZT(PZT5H) ref:5400 Loss fac... |
