Power-Type Wiegand Sensor WG612
Power-Type Wiegand SensorWG612
Wiegand Sensor
Signal Type Wiegand Sensor Supplier
Features
No need the power supply when it works.
Bipolar excitation working mode, the sensor outputs a pair of positive and negative electrical pulse signal when the magnetic field polarity changes for a circle.
Only when the external magnetic field polarity changes, and magnetic strength reaches the excitation threshold, the sensor will outputs a pulse signal, so the vibration won’t happen. The operation is stable and reliable.
The signal amplitude has nothing to do with the magnetic field changing speed, and it can work at the speed near to zero.
The output signal can be remote transmitted by the signal lines, so it’s suitable for LAN management.
No mechanic contact, no spark, is a kind of intrinsic safety devices.
Wide operating temperature range, strong environmental adaptability.
Principle outline
Zero power consumption sensor WG112 ( it also be called Wiegand Sensor) is a kind of new type magnetic component that is made based on Wiegand effect. It can initiative generate energy, no need external power when it works. It can give a sharp voltage pulse signal. The sensor consists of a special processed alloy wire and induction coil which winds on the outside of wire , framework and pins etc.
The alloy wire owns double magnetic structure, its core is soft magnet, and the shell is hard magnet. To utilize the magnetic difference between the alloy wire’s inside and outside, under excitation by suitable strength of alternating magnetic field, the core magnetization direction everted in a moment, the direction became same or opposite with that of shell, and make the magnetic field around alloy wire changed suddenly, then a group of positive and negative pulse generated in the induction coil. The pulse amplitude is only regard with strength of the excitation field, and it has nothing to do with the field changing speed. It realized “Zero Speed” counting detection.
More information please view here
在线联系供应商
Other supplier products
 |
Latch Type Hall Sensor AH4158 | Latch Type Hall SensorAH4158 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operatin... |
 |
Latch Type Hall SensorAH3051 | by reverse voltage.Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperatu... |
 |
Signal-Type Wiegand Sensor WG215 | Signal-Type Wiegand SensorWG215 Wiegand Sensor Signal Type Wiegand Sensor Supplier Features No need the power supply when it works. Bipolar ex... |
 |
Nice design hall effect linear sensor Linear Hall Sensor AH3507 | Linear Hall SensorAH3507 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6 V; Operating temperature range: -40℃ ~ 125℃; Rail t... |
 |
Latch Type Hall Sensor AH4059 | Latch Type Hall SensorAH4059 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operatin... |
Same products
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CAFR-A-NP系列是航智自主研发的可焊接在PCB电路板上的电流传感器，基于磁通门技术，可实现直流电流和交流电流的隔离测量。 测量范围：±6A至±50A。精度：&... |
 |
Hangzhi CIT High Precision Split Core current transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CIT系列高精度分体式电流传感器是航智基于磁通门技术开发的，可实现直流电流和交流电流的隔离测量。 测量范围：±100A至±1500A。精度：0.05%。线性度：0.... |
 |
BMS300 Automotive Current Sensor Transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300磁通门传感器由励磁磁环和控制电路组成，正常情况下，控制电路产生固定的励磁电流频率，使磁芯交替处于最大饱和点，当测量电流流过时，通过检测饱和点的对称性来测量一次电流。 BMS系列适用... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG在现有的直流传感器技术基础上，采用了多点零磁通技术体系和高频纹波传感通道，在全带宽范围内具有较高的增益和测量精度。 关键技术励磁闭环控制技术自励退磁技术多点零磁通技术温控补... |
 |
DIT300-SG high-precision digital current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | 航智DIT300-SG是一款300安培高精度数字电流传感器，精度为200ppm（200百万分之一）。 该高精度直流传感器采用多点零磁通技术体系，实现了励磁磁通、直流磁通、交流磁通的零磁通闭环控... |
