Microwave Motion Sensors AC Input
Remote Control Microwave Sensor
Microwave Motion Sensors AC Input
AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable
HNS205
Operating voltage: 120〜277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)Features
•5.8GHz C-band microwave motion sensor, tri-level dimming control.
•Operating voltage: 120〜277V AC, 50/60Hz.
•Rated load: 400W @ 120VAC, (capacitive)
•800W @ 200〜277VAC, (capacitive)
•Stand-by power: <1w.
•Particularly designed for fixtures which with limited space, ideal for LED panels, linear office lights with metal louvres, compact bulkheads, etc. Hide the sensor body and configure the small detached antenna head only.
•Dual-PD technology, real Daylight monitoring function for built-in application.
•Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay.
•DIP switch + IR Remote control 2 channels setting. Automatically override each other upon the latest operation.
• RJ11 connection between the sensor body and antenna head, easy plug and play.
• Detection range up to 12m in diameter.
•Mounting height: 3~6m.
• Operation temperature: -20℃~ + 70℃
• IP rating: IP20.
Settings(DIP switch)
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable":The sensor works always, even during daylight.
"50lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
"+∞": means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
*0% means on/off control.
10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc 50%--Vdim=5.0VdcSettings(Remote control IR12)
Permanent ON/OFF function
Press "ON/OFF" button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto", "Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the wDimw button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to the value of DIP switch settings.
Ambient learn
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset", or any button of "Hold time" The sensor settings are changed accordingly.
*Test mode defaulted settings—
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
In this mode, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
More information please view .
在线联系供应商
Other supplier products
 |
AC Input Microwave Motion Sensors | AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS201 Operating voltag... |
 |
AC Input Microwave Motion Sensor - Standard Version | AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS201 Operating voltag... |
 |
Microwave Sensor AC Input | AC Input Microwave Motion Sensors Microwave Sensor AC Input AC Input Microwave Motion Sensor - Standard Version HNS203 Operating voltage: 120〜2... |
 |
Remote Control DC Input Motion Sensor | 5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version Remote Control DC Input Motion Sensor Motion Sensor Module DC Input ... |
 |
Detachable Version + Remote Controllable | AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable Standard AC Input Motion Sensor Microwave Motion Sensors AC Input HN... |
Same products
 |
AIT500-SG High-Precision Current Sensor Transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT500-SG 凭借其在现有直流传感器技术基础上应用的多点零磁通技术系统和高频纹波传感通道，在全带宽范围内实现了高增益和高测量精度。 多点零磁通技术系统通过结合激励磁通闭环控制、自激励磁通... |
 |
JWA2-M Oil Micro Moisture Sensor | 卖方: Shenzhen Joinwe Smart Co.,Ltd | JWA2-M micro moisture sensorcan quickly and accurately detect oil water activity (moisture satura... |
 |
Made in China Displacement sensor 4000TDG for thermal power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Displacement sensor 4000TDG for thermal power plant YOYIK professional production ... |
 |
China made Control System LVDT 5000TDGN for power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Control System LVDT 5000TDGN for power plant Dongfang Yoyik has advanced technology a... |
 |
China supplier main control board APF7.820.117A-A power plant spare parts | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier main control board APF7.820.117A-A power plant spare parts Dongfang Yoyik is spec... |
