Power-Type Wiegand Sensor WG612
WG612
L It needn't power supply when it works.L High output amplitude, and it can reach 30V when it is no-load, its high value can reach more than 40V.L Bipolar motivation operating mode. When the polarity changes for 1 circle, the sensor will output a pair of plus-minus pulses.L Only when the polarity of the applied magnetic field changes, and the magnetic strength reaches motivation threshold, the sensor will output a pulse signal, so no trembling occurs, and the operation is stable and reliable.L The signal amplitude is independent with the changing speed of magnetic field, and it can work under the speed close to zero.L The signal processing is simple, and it can be directly connected to triode, comparer and ADC etc.L Output signal can utilize signal wire to realize remote transmission, and it's suitable for LAN management.L No Mechanical contacts, no electric spark, it's a kind of intrinsically safe component.L Wide operating temperature range, strong environmental suitability.ApplicationL Rotation Counting: Heavy caliber intelligent water meter, heat meter, gas meter, oil meter, flow meter, odometer, etc.L Position Detection: Oil depot level detection, tipping bucket udometer, unattended hydro-meteorological monitor etc.L Electronic Switch: Flame-proof switch, ignition switch etc.L Impulsing Power Source: Encoder, UWB power etc. Performance Parameter
More information please view:
在线联系供应商
Other supplier products
Unipolar Hall Sensor AH443 | Featuresof our Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -40℃ ~ 150℃; Rated output cur... | |
Signal-Type Wiegand Sensor WG214 | WG214 Features No need the power supply when it works. Bipolar excitation working mode, the sensor outputs a pair of positive and negative e... | |
Linear Hall Sensor AH496B | Linear Hall Sensor AH496B Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 10 V;, Operating temperature range: -40℃ ~ 125℃; Rail to... | |
Latch Type Hall Sensor AH3043 | Latch Type Hall SensorAH3043 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating tem... | |
Latch Type Hall Sensor AH3041N | Latch Type Hall SensorAH3041N Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating te... |
Same products
Hangzhi CAFR-A-NP Series PCB Current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CAFR-A-NP系列是航智自主研发的可焊接在PCB电路板上的电流传感器,基于磁通门技术,可实现直流电流和交流电流的隔离测量。 测量范围:±6A至±50A。精度:&... | |
Hangzhi CIT High Precision Split Core current transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CIT系列高精度分体式电流传感器是航智基于磁通门技术开发的,可实现直流电流和交流电流的隔离测量。 测量范围:±100A至±1500A。精度:0.05%。线性度:0.... | |
BMS300 Automotive Current Sensor Transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300磁通门传感器由励磁磁环和控制电路组成,正常情况下,控制电路产生固定的励磁电流频率,使磁芯交替处于最大饱和点,当测量电流流过时,通过检测饱和点的对称性来测量一次电流。 BMS系列适用... | |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG在现有的直流传感器技术基础上,采用了多点零磁通技术体系和高频纹波传感通道,在全带宽范围内具有较高的增益和测量精度。 关键技术励磁闭环控制技术自励退磁技术多点零磁通技术温控补... | |
DIT300-SG high-precision digital current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | 航智DIT300-SG是一款300安培高精度数字电流传感器,精度为200ppm(200百万分之一)。 该高精度直流传感器采用多点零磁通技术体系,实现了励磁磁通、直流磁通、交流磁通的零磁通闭环控... |