Smart Sensor
Smart Sensor
The multifunctional power sensorES210T,adopts advanced ultra-low power large-scale integrated circuit technology and high-tech products manufactured by SMT process. The key components are long-life components of international well-known brands to improve reliability and life of the product.The combined electric fire detector ES210T is composed of safety monitoring unit and metering unit with RS485 communication function. In the safety monitoring, the built-in current transformer is used to monitor the remaining current, and the built-in temperature sensor is used to monitor the wire temperature. The meter has the advantages of high measurement accuracy, good stability, strong overload capacity and high reliability, widely used for monitoring & measuring safety parameters .
- multifunctional sensorStandards
Complied with standards:
IEC 62052 - 11 - 2003 electric measuring instrument. General requirements, test and test conditions-part 11 measuring instruments
IEC 62052 - 21 - 2004 Electric quantity measuring equipment (AC) General requirements, tests and test conditions. Part 21: tariff and load control equipment
- Fire DetectorBasic Functions
The multifunctional power sensor can measure, record and display the remaining current, wire temperature and other safety parameters of the circuit of the current equipment, as well as the operating parameters such as power, voltage, current, power factor and so on.
The multifunctional sensor manufactureruses three bright & long-life LED indicators with the following backlight display panel functions:
-Relay indicator: red, which lights up only when the contacts of relay are closed .
-Pulse indicator: flashes when the device is running at the load end, flashes more frequently with the greater the total power of the device, and does not flash when there is no load.
-Backlight indicator: green, working properly; yellow, alarm event; red, alarm trip event
在线联系供应商
Other supplier products
 |
Suspension Meter | Suspension Meter D129022 is a single phase two wires suspension type energy meterwith 60A latching relay, LCD display, FIR & RS485 communicatio... |
 |
Kwh Meter | Kwh Meter DTSY-T01 is a single phase din-rail metertwo wire split type prepayment keypad meterapproved by STS. It can access to any STS standard sy... |
 |
Power Sensor | Power Sensor The multifunctional power sensorES730T, adopts advanced ultra-low power large-scale integrated circuit technology and high-tech produc... |
 |
Smart Sensor Manufacturer | Smart Sensor Manufacturer single phase smart sensorwith WIFI & RS485 communication，including information collection , real-time monitoring,en... |
|
|
Smart Sensor | Smart Sensor The multifunctional power sensorES210T,adopts advanced ultra-low power large-scale integrated circuit technology and high-tech product... |
Same products
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CAFR-A-NP系列是航智自主研发的可焊接在PCB电路板上的电流传感器，基于磁通门技术，可实现直流电流和交流电流的隔离测量。 测量范围：±6A至±50A。精度：&... |
 |
Hangzhi CIT High Precision Split Core current transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CIT系列高精度分体式电流传感器是航智基于磁通门技术开发的，可实现直流电流和交流电流的隔离测量。 测量范围：±100A至±1500A。精度：0.05%。线性度：0.... |
 |
BMS300 Automotive Current Sensor Transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300磁通门传感器由励磁磁环和控制电路组成，正常情况下，控制电路产生固定的励磁电流频率，使磁芯交替处于最大饱和点，当测量电流流过时，通过检测饱和点的对称性来测量一次电流。 BMS系列适用... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG在现有的直流传感器技术基础上，采用了多点零磁通技术体系和高频纹波传感通道，在全带宽范围内具有较高的增益和测量精度。 关键技术励磁闭环控制技术自励退磁技术多点零磁通技术温控补... |
 |
DIT300-SG high-precision digital current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | 航智DIT300-SG是一款300安培高精度数字电流传感器，精度为200ppm（200百万分之一）。 该高精度直流传感器采用多点零磁通技术体系，实现了励磁磁通、直流磁通、交流磁通的零磁通闭环控... |
