Low Power Consumption Infrared Motion Sensor for Lighting G2X2
An Overview of Low pir sensor power consumptionInfrared Motion Sensor for Lighting G2X2
G2X2, with the low power pir motion sensor module, is quad elements type products. With same horizontal and vertical detection angles. It is widely used in ceiling light.
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyroelectric", or "IR motion" sensors.
Features
Quad Elements
Same horizontal and vertical detection angles
Slight movement can be detectable
|
Recommended Model |
G2X2 |
|
Encapsulation Type |
TO-5 |
|
IR Receiving Electrode |
|
|
Window Size |
|
|
Spectral Response |
7—14µm |
|
Transmittance |
≥75% |
|
Output Signal[Vp-p] |
≥3500mV |
|
Sensitivity |
≥3300V/W |
|
Detectivity (D*) |
|
|
Noise[Vp-p] |
<70mV |
|
Output Balance |
<10% |
|
Offset Voltage |
|
|
Supply Voltage |
3—15V |
|
Operating Temp |
-30—70ºC |
|
Storage Temp |
-40—80ºC |
|
Field of View |
Applications
Ceiling Lighting
security systems
FAQ
The first cause of PIR false alarms is low or unstable voltage at the detector. Test to make sure the voltage at each PIR is above 13VDC and stable. The second cause of false alarms is sudden infrared movement / heat changes in view of the detector.
Yes, motion sensors work in the dark. The way that a motion sensor detects movement has nothing to do with how light or dark it is in the immediate area. Since infrared energy is present and can be detected regardless of the amount of light in the environment, a PIR motion sensor will work just fine in the dark.
SenbaSensing Technology Co.,Ltd., setsfocus on producing top quality photoelectric components, such as passive ir motion sensor, Photoresistors and Light Sensors ,etc.These series of senba sensorare advanced in this field.
在线联系供应商
Other supplier products
 |
Plastic Fresnel Lens S9008 Used in Alarm System | Owning very strong R&D Center, Senba can research and develop the pyroelectric infrared sensor independently. Among those pir sensor manufactur... |
 |
Metal Casing Good Reliablity Phototransistor D57 Series for Light Control Lamp | Owning very strong R&D Center, Senba can research and develop the pyroelectric infrared sensor independently. Among those pir sensor manufactur... |
 |
Low Differential Pressure Transmitter/Transducer | Low Differential Pressure Transmitter For measuring very small pressure differences between two measurement points either side of a ventilation fan... |
 |
Analog Optoisolator | Linear optocoupler is an optocoupler semiconductor devicethat controls the change in resistance by a change in input current. It is an analog linea... |
 |
Analog PIR Sensor | pir sensor analog or PIR , pyroelectric infrared sensor, is normally known as a motion detector. It is a passive sensor based on measuring infrared... |
Same products
 |
T60404-N4646-X400 | 卖方: 双为（香港）科技有限公司 | 板上安装电流传感器 Current Sensor 25A 3 pri pins +/-15V 产品属性属性值选择属性 制造商: Vacuumschmelze 产品... |
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CAFR-A-NP系列是航智自主研发的可焊接在PCB电路板上的电流传感器，基于磁通门技术，可实现直流电流和交流电流的隔离测量。 测量范围：±6A至±50A。精度：&... |
 |
Hangzhi CIT High Precision Split Core current transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CIT系列高精度分体式电流传感器是航智基于磁通门技术开发的，可实现直流电流和交流电流的隔离测量。 测量范围：±100A至±1500A。精度：0.05%。线性度：0.... |
 |
BMS300 Automotive Current Sensor Transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300磁通门传感器由励磁磁环和控制电路组成，正常情况下，控制电路产生固定的励磁电流频率，使磁芯交替处于最大饱和点，当测量电流流过时，通过检测饱和点的对称性来测量一次电流。 BMS系列适用... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG在现有的直流传感器技术基础上，采用了多点零磁通技术体系和高频纹波传感通道，在全带宽范围内具有较高的增益和测量精度。 关键技术励磁闭环控制技术自励退磁技术多点零磁通技术温控补... |
