100G, 200G DWDM OADM Module(4, 8 Channel)
Features• ITU channel spcaing• Low insertion loss• Wide pass band• High Channel Isolation• High Stability and reliability• Epoxy-free on Optical Path• Access NetworkApplications• Channel Add/Drop• DWDM Network• Wavelength Routing• Fiber Optical amplifier• CATV fiberoptic SystemPerformance SpecificationsParameter4 Channel8 ChannelAddDropAddDropChannel Wavelength (nm)ITU GridCenter wavelength Accuracy (nm)±0.05（100G）/ ±0.1（200G）Channel Spacing (GHz)100Channel Passband bandwidth (nm)>0.22 (100G) / >0.5(200G)Insertion Loss Channel Ripple (dB)<0.3Isolation @Add/Drop ChannelAdjacentN/A>30N/A>30Non-adjacentN/A>40N/A>40Inertion Loss Temperature Sensitivity (dB/℃)<0.005Wavelength Temperature Shifting (nm/℃)<0.002Polarization Dependent Loss (dB)<0.1Polarization Mode Dispersion (ps)<0.1Directivity (dB) (Input to add,Website:, Output to drop, add to drop>50Return Loss （dB）>45Maximum Power Handling (mW)500Opterating Temperature (℃)-10~+75Storage Temperature (℃)-40~+85Package dimension (mm)L100x80xH10Specification may change without notice.Specification may change without notice.Ordering InformationOADMXXXXXXXXXXX Channel SpacingNumber of ChannelsConfiguration1st ChannelFiber TypeFiber LengthIn/Out Connector1=100GGrid2=200GGrid4=4CH8=8CH44=4x4 Addand Drop8=8x8 Addand Drop21=CH21……34=CH34……50=CH50……1=Bare fiber2=900um loose tube3=2mmCable4=3mmCable1=1m2=2mS=Specify0=None1=FC/APC2=FC/PC3=SC/APC4=SC/PC5=ST6=LCS=Specify
Other supplier products
|
|
|
DescriptionHigh performance Fiber Link Ethernet Extenders provide up to 120KM of Ethernet extension over single-mode fiber. The Model FS-1100 is id... |
|
|
|
1、Product Introduction：Compact SFP CSFP Tight little shapes can be inserted into the CSFP transceiverCompact small form-factor pluggable CSFP tra... |
|
|
|
DFB Erbium-Doped CATV EDFA RS485 Controls ,Website:, Silver Indoor Fiber Amplifier 1550±10nm 22dBm Erbium-DopedFiber Amplifier (EDFA) with SNMP(OPT... |
|
|
|
Description200GHz dense wavelength division multiplexer (DWDM) utilizes thin film coating technology and proprietary design of non-flux metal bondi... |
|
|
|
Description2x2 Mechanichal Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is... |
供应产品
Same products
