BIDI SFP+ Transceiver
DescriptionBIDI SFP+ Transceivers are Small Form Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps,Website: designed to be compliant with SFF 8472 and SFP+ MSA. The module data link up to 10km or 40km in 9/125um single mode fiber. The optical output can be disabled by a LVTTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.Features• Up to 10,7Gbps Bi-directional Data Links• Compliant with SFP+ MSA with duplex LC connector• 1270/1330nm DFB laser Transmitter and 1330/1270nm PIN Receiver• Built-in digital diagnostic functions• Single Mode LC Receptacle Bi-directional Transceiver• Single +3.3V Power Supply and LVTTL Logic• EEPROM with Serial ID Functionality• Case operating temperature range: -5°C to 70°CApplications• 10GBASE-BX at 10.3125 Gbps• 10GBASE-BX at 9.953Gbps• 1000 Base-LX EthernetOrdering InformationPart No.Data RateDistanceWavelengthOutput Power (dBm)Receiver Sensitivity (dBm)DDMIFBP-27339-10xD10Gbps10kmT1270 DFB R1330PIN-6~-1＜-15YFBP-33279-10xD10Gbps10kmT1330 DFB R1270PIN-6~-1＜-15YFBP-27339-40xD10Gbps40kmT1270 DFB R1330PIN-1~4＜-15YFBP-33279-40xD10Gbps40kmT1330 DFB R1270PIN-1~4＜-15YPDFBIDI SFP+ Transceiver
Other supplier products
|
|
|
Description2x2B Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved u... |
|
|
|
Description100GHz dense wavelength division multiplexer (DWDM) utilizes thin film coating technology and proprietary design of non-flux metal bondi... |
|
|
|
Sopofiber offers a full range of AWG products,Website:, including 50GHz, 100GHz and 200GHz AWG. Here we present the generic specification for the 4... |
|
|
|
DFB Erbium-Doped CATV EDFA RS485 Controls ,Website:, Silver Indoor Fiber Amplifier 1550±10nm 22dBm Erbium-DopedFiber Amplifier (EDFA) with SNMP(OPT... |
|
|
|
EDFA multi-channel gain block optical amplifier is specially designed to meet low noise and gain flatness requirements of dense wavelength division... |
供应产品
Same products
