10-100M-Media Converter
DescriptionFM-11 series Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base-TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward,Website:, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single-mode dual fiber, single-mode single fiber.Features• 0/100Mbps auto-sensed, facilitating network upgrade• Built-in efficient switching core to implement flow control and reduce broadcast packets• Full-duplex and half-duplex auto-sensed• Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation• Supporting low-timelag transmission• Supporting the transmission of extra-long packets up to1600 bytes• Supporting the transmission of extra-long VLAN packets• Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets• Supporting STP to form a redundant network• Extremely low power consumption (less than 2W), low heat, reliable and stable performance, and long lifetimeApplications• 10/100Mbps fast optical Ethernet long-distance transmitting networkPerformance SpecificationsParameterSpecificationsAccess mode10/100MbpsStandardIEEE802.3 10Base-T, IEEE802.3u 100Base-TX ,100Base-FX ;WavelengthMulitmode:850/1310nm; Single-mode:1310/1550nm (Option)DistanceCategory-5 twisted pair: 100m Fiber：multi-mode 50/125,62.5/125μm（the max distance up to 2km or 5km） Fiber：Single -mode 8/125,8.7/125,9/125,10/125μm（the max distance up to 20 -120km）PortOne RJ45 port: For connecting STP/UTP category-5 twisted pairs One optical port: Multi-mode, dual fiber: SC or ST (50, 62.5/125μm) Single mode, dual fiber: SC or FC (9/125μm) Single mode Single fiber: SC or FC (9/125μm)Conversion meansMedia conversion, store-and-forward/cut-throughMAC address table1KBuffer space1MbitFlow controlFull duplex: flow control; Half duplex: back pressureDelayStore-and-forward: 9.6μs; cut-through: 0.9μsBER<19-9MTBF100,000 hoursLED indicatorPWR (power supply); FX LINK/ACT (optical link/action) FDX (FX full duplex), TP LINK/ACT (twisted pairs link/action) TP 100 (100M transmission rate of twisted pairs), FX 100 (100M transmission rate of optical fiber)Power supplyDC5V 1A (external), AC220 0.5A/DC-48 (internal)Power consumption<2WOperating temperature-10~55ºCOperating humidity5%~90%Maintaining temperature-40~70ºCMaintaining humidity5% ~ 90% non-condensingDimensions71mm (W) * 94mm (D) * 26 mm (H) (external power supply)Ordering InformationModelwavelengthFiberTX portFiber ModeTX power (dBm)RX Sen. (dBm)DistanceFM/1310nmSC/STRJ-45MM,Duplex-22 to -12≤-302kmFM-1100-L21310nmSC/FCRJ-45SM, Duplex-15 to -8≤-3720kmFM-1100-L41310nmSC/FCRJ-45SM, Duplex-8 to -3≤-3740kmFM-1100-L61310nmSC/FCRJ-45SM, Duplex-3 to 0≤-3760kmFM-1100-L81550nmSC/FCRJ-45SM, Duplex-8 to -3≤-4080kmFMnmSC/FCRJ-45SM, Duplex-3 to 0≤-40100kmFMnmSC/FCRJ-45SM, Duplex0 to 3≤-40120kmFM-1101-L2AT1310/R1550SCRJ-45SM,BI-DI-13 to -8≤-3620kmFM-1101-L2BT1550/R1310SCRJ-45SM,BI-DI-13 to -8≤-3620kmFM-1101-L4AT1310/R1550SCRJ-45SM,BI-DI-8 to -3≤-3640kmFM-1101-L4BT1550/R1310SCRJ-45SM,BI-DI-8 to -3≤-3640kmFM-1101-L8AT1310/R1550SCRJ-45SM,BI-DI-5 to -3≤-3680kmFM-1101-L8BT1550/R1310SCRJ-45SM,BI-DI-5 to -3≤-3680kmPDF10-100M-Media Converter
Other supplier products
|
|
|
DescriptionCoarse wavelength division multiplexer (CWDM) utilizes thin film coating technology and proprietary design of non-flux metal bonding mic... |
|
|
|
DescriptionPlanar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide t... |
|
|
|
Sopofiber' Micro-Optics WDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provi... |
|
|
|
EDFA-MW/GW-VGA optical amplifier is specially designed for DWDM transmission system.EDFA-MW is optoelectronic integrated module and EDFA-GW is pure... |
|
|
|
Description2x2B Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved u... |
供应产品
Same products
