220w Ip67 Round Driver
If you are planning to buy high-quality CE certification 220W ip67 round driver at low price from one of the professional China 6a outpurt constant current driver,Website:, wateproof constant current led driver, 200w round driver, 250w constant current round power, 220w round power supply manufacturers, please feel free to contact Zhihe Xingye Electronics Co.,Ltd.
220W 36V Constant Voltage LED Driver ZH-HBG-220 Waterproof IP67 Round Shape SMPS Features: Universal AC input / Full range (up to 305VAC) Built-in active PFC function Protections: Short circuit /Over current /Over voltage /Over temperature OCP point adjustable through Output Cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Suitable for dry / damp / wet locations 3 years warranty, Tc70℃ 40000hrs Model Series: ZH-HBG-220-24() / HBG-220-36() / HBG-220-48() /HBG-220-60() Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output constant current level can be adjusted through internal potentiometer. B : IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance E(option) : IP67 rated. Can be fixed by steel support. Parameter
Model
HBG-220H-24
HBG-220H-30
HBG-220H-36
HBG-220H-42
HBG-220H-48
HBG-220H-54
Non-standard type
Output
DC voltage
24V
30V
36V
42V
48V
54V
55-220V
Rated current
8.4A
7A
6.1A
5.2A
4.6A
4.1A
0.5-2.4A
Rated power
201W
210W
220W
218.4W
220.8W
221.4W
220W
Ripple&Noise
150mVp-p
150mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
MAX 500mVp-p
Output voltage
18-24V
20-30V
26-36V
30-42V
36-48V
42-54V
Customized
Output current
Can be adjusted by internal potentiometer（Only A）
4-8.4A
3.5-7A
3-6.1A
2.5-5.2A
2.3-4.6A
2-4.1A
Customized
Voltage tolerance
1%
1%
1%
1%
1%
1%
1%
Line Regulation
0.50%
0.50%
0.50%
0.50%
0.50%
0.50%
1%
Load Regulation
0.50%
0.50%
0.50%
0.50%
0.50%
0.50%
1%
Starting Time
2500ms，50ms（@full load）230VAC/115AC;
B model：2500ms，200ms（@full load）230VAC/115AC;
Hold-up Time（Typ）
10ms@full load 230VAC/115VAC
Input
Input voltage
100-277VAC OR 130-420VDC
Frequency range
47-63HZ
Power Factor（Typ）
PF>0.98 115VAC, PF>95 230VAC, PF>0.93VAC 277VAC @full load
Efficiency（Typ）
>88%
>88%
>89%
>89%
>90%
>90%
>90%
AC current（Typ）
1.4A/115VAC, 0.6A/230VAC ， 0.55A/277VAC
Input inrush
current（Typ）
(cold start)<50A /230VAC
Leakage Current
<0.75MA/277VAC
Protection
Output Over-
current protection
OCP point95-105%
When the output current is over,
Return to normal status when output limit current to get right.
Short Circuit
Protection
The input power shall decrease when the output rail short,
the power supply shall no damage,
and shall be self-recovery when the fault condition is removed
Over Voltage
28-34V
34-40V
42-50V
48-56V
54-64V
60-67V
Customized
When the output voltage is over,
the products is protected such as hiccup or when it is at
the highest point of output voltage the product would not
be hurt when the fault is excluded or is start working again.
Over Temperature
85℃±10℃，start
85℃ automatic recovery，Derating Mode .
When temp reach 95℃,The Max current will decline 40%
Environment
Operatin
gTemperature
-40---+70℃
Relative operation
Humidity
20-95%RH
Relative Storage
Humidity
-40-+80℃，10-95%RH
Max temperature
Rise
+30℃ Without wind open environment, the highest temperature of the shell.
Vibration
10-500HZ,5G 12minutes per cycle for each axis(X,Y,Z)
Safety Standards&EMC
Safety
Standards
EN 61347-1：2008+A1：2011+A2：2013, EN 61347-2-13：2006, EN 62493：2010
Dielectric
Strength(Hi-pot)
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Insulation
Resistance
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/70%RH
EMC Emission
EN55015，EN55022(CISPR22),Class B,EN61000-3-2：2006+AA:2009 (≥70%@ full load)
EMC immunity
EN55024-A ,EN61000-3-3：2013
Others
MTBF
≥150Khrs MIL-HDBK-218F(25℃)
Size
152mm*52.5mm
Package
carton
Note
All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using
a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.Constant current operation region for LED related applications,
but please reconfirm special electrical requirements for some specific system design.
5.Derating may be needed under low input voltages.
Please check the static characteristics for more details.
6.Length of set up time is measured at cold first start.
Turing ON/OFF power supply may lead to increase of the set up time.
7.The power supply is considered as a component that will be
operated in combination with final equipment.
Since EMC performance will be affected by the complete installation,
the final equipment manufacturers must re-quality EMC Directive on the complete installation again.
8.To fulfill requirements of the latest ErP regulation for lighting fixtures,
this LED power supply can only be used behind a switch without permanently.
Size(：mm)
Blank:(ZH-HBG-220H)
Certifications
Package
Other supplier products
|
|
|
If you are planning to buy high-quality CE certification 400W ip67 LED driver for street light at low price from one of the professional China... |
|
|
|
Product Features: 1.Output power:20W 2,Website: power and high quality 3,Low price and high reliability 4.Constant current 5.High efficiency 6.... |
|
|
|
If you are planning to buy high-quality CE certification 300W ip67 LED driver for tunnel light at low price from one of the professional China dc24... |
|
|
|
If you are planning to buy high-quality CE certification 200W ip67 LED driver for tunnel light at low price from one of the professional China moso... |
|
|
|
Product Features: 1.Output power:80W 2,Website: power and high quality 3,Low price and high reliability 4.Constant current 5.High efficiency 6.... |
供应产品
Same products
