It's About the Life of LED Displays. These Little Common Senses Must Be Understood
It's About the Life of LED Displays. These Little Common Senses Must Be Understood
The theoretical life of LED display fromis up to 100,000 hours. In practical applications, due to the influence of the external environment, especially in products that have been used for more than 5 years, small defects occasionally occur. In order to make the LED display closer to the theoretical life, practitioners must understand the small common sense of LED cleaning and LED over-current protection, and can use it comprehensively.
1, LED pin forming method
1) It is necessary to bend the bracket 2 mm from the gel.
2) Bracket forming must be done with a clamp or by a professional.
3) Bracket forming must be completed before welding.
4) The bracket is formed to ensure that the pins and spacing are consistent with the board.
2, pay attention to LED bending feet and cutting feet
Because the design requires bending and cutting feet, when bending and cutting the LED, the position of the bending foot and the cutting foot is more than 3mm from the bottom surface of the gel.
The bent feet should be made before welding.
When using the LED to insert the lamp, the PCB board hole spacing corresponds to the LED pin spacing.
When the foot is cut, the high-voltage static electricity is generated due to the vibration of the cutting machine. Therefore, the machine should be grounded reliably, and the anti-static work should be done (the ion fan can be blown to eliminate static electricity).
- cleaning
Special care must be taken when cleaning the gel with chemicals, as some chemicals damage the surface of the gel and cause fading such as trichloroethylene, acetone, and the like. It can be wiped and dipped with ethanol for less than 3 minutes at room temperature.
4, on LED overcurrent protection
Overcurrent protection can be used to stabilize the LED series protection resistor
The resistance value is calculated as: R=(VCC-VF)/IF
VCC is the power supply voltage, VF is the LED drive voltage, and IF is the forward current.
5, LED welding conditions
1) Soldering iron soldering: The soldering iron (up to 30W) tip temperature does not exceed 300 ° C, the soldering time does not exceed 3 seconds, and the soldering position is at least 2 mm from the colloid.
2) Wave soldering: The maximum temperature of dip soldering is 260 ° C, the dip soldering time is less than 5 seconds, and the dip soldering position is at least 2 mm from the colloid.
LIvisionstrictly implements the quality certification system in the manufacturing process, which effectively guarantees the quality of the products. In addition, a large number of high-quality professional R & D, production and sales personnel can provide customers with high-quality, high-performance LED applications and services.
Hot Sale LED Video Wall, which include Outdoor Advertising Screens, Indoor Rental LED Screen, Floor Standing LED Display, See-Through LED Display, HD LED Vedio Panel. Low price, high quality. All LED Video Displayprovides 5 years warranty service.
If you want to know more product information, please click here
在线联系供应商
Other supplier products
 |
L Series Indoor LED Screen,LED Advertising Screen,Indoor LED Video Wall | L Series Indoor LED Screen,LED Advertising Screen,Indoor LED Video Wall Item:500*500 IndoorLED Screen: Applications:Conferences, concerts, Stage B... |
 |
V Series Outdoor LED Display,Outdoor advertising screens,Outdoor LED Video Wall | V Series Outdoor LED Display,Outdoor advertising screens,Outdoor LED Video Wall Item:500*500 OutdoorLED Display. Applications:Outdoor Events, Conce... |
 |
S Series Outdoor LED Screen,Outdoor LED Display,Outdoor LED Video Wall | S Series Outdoor LED Screen,Outdoor LED Display,Outdoor LED Video Wall Item:Outdoor Football Stadium LED Screen. Applications:Football Stadium. Cer... |
 |
What Aspects Can LED Manufacturers Choose to Start With? | What Aspects Can LED Manufacturers Choose to Start With? Nowadays, many advertising industry will use the display to promote the content, so that u... |
 |
I Series Outdoor LED Screen,Outdoor LED Video Wall,LED Wall panel | I Series Outdoor LED Screen,Outdoor LED Video Wall,LED Wall panel Item:500*500/*1000 OutdoorLED Video Wall: Applications:Outdoor Event Rental, Outd... |
Same products
 |
iFixes iL37 显微镜照明器偏光环形灯 96 个 LED 灯 | 卖方: 深圳市维客修科技有限公司 | 使用配备 96 个超亮 LED 的 iFixes iL37 偏光环形灯增强您的立体工作。KAISI TRUE L 环形灯多层偏光器调试 40 个 LED 光源 USB-3.5 DC 升线适用于立... |
 |
Energy Saving LED Tube Light | 卖方: D263, second floor, Hai Rong Hao Wan, Dalang south Road, Hualian Community, Long | Energy Saving LED Tube Light As a reliable led tube light company, led tube light factory, Anern ... |
 |
Deep Cycle Opzv Tubular Gel Solar Battery | 卖方: D263, second floor, Hai Rong Hao Wan, Dalang south Road, Hualian Community, Long | Deep Cycle Opzv Tubular Gel Solar Battery The OPzV solar battery series is a tubular colloidal b... |
 |
All-in-one Solar Street Light 150LM/W (ISSL-C) | 卖方: D263, second floor, Hai Rong Hao Wan, Dalang south Road, Hualian Community, Long | All-in-one Solar Street Light 150LM/W (ISSL-C) AN-ISSL-C 150-watt solar street light series use ... |
 |
All-in-one Solar Light With Remote Control(ISGL08) | 卖方: D263, second floor, Hai Rong Hao Wan, Dalang south Road, Hualian Community, Long | All-in-one Solar Light With Remote Control(ISGL08) AN-ISGL08 solar street light with remote contr... |
