Via In Pad Fr4 PCB
Via In Pad fr4 pcb board, using copper plating or epoxy to fill holesfor circuit board factor, prevent solder paste or flux from flowing into the via in pad, avoid solder ball getting into via or solder mask cover on pad and cause false soldering. HUIHE CIRCUITS Via In PadPCBhas passed ISO9001/ISO13485/IATF16949/UL/RoHS/REACH certification.
Via In Pad Fr4 PCB List
10 Layer Impedance Control Resin Plugging PCB
16 Layer ENIG Press Fit Hole PCB
6 Layer ENIG via-in-pad Prototype PCB Board
6 Layer ENIG via-in-pad PCB Prototype Service
6 Layer ENIG via-in-pad PCB
8 Layer ENIG via-in-pad PCB
What Is A Hole-In-The-Panel Circuit Board?
The hole in the disk is an important part of the multi-layer PCBChina. It is not only responsible for the main functions of the PCB, but also the cost of drilling usually accounts for 30% to 40% of the fr4 circuit board manufacturingcost. In short, the holes pressed on the pads on the PCB can all be called holes in the disk.
Processing Requirements For Hole Plugs In The Disk
No solder mask ink entering the hole
There should be no tin beads hidden in the hole
No explosive oil, ink pads, making it difficult to mount components, etc.
Common Sense Of PCBCircuitBoard Plug Hole
Prevent the tin from penetrating the component surface from the via hole to cause a short circuit when the PCB is wave soldered
Avoid flux residue in the vias
Prevent the tin balls from popping up during wave soldering, causing short circuits
Prevent surface solder paste from flowing into the hole, causing false soldering and affecting placement
If you want to know more about pcb board material fr4and fr4 pcb thickness, please contact us.
在线联系供应商
Other supplier products
hhcircuits.12 | Half Hole & Through Hole Pcb Through hole circuit board& half hole PCB, no copper burr residue or warpage in half hole, reduce connector... | |
6 Layer ENIG Impedance Control PCB Bare Board | Number of layers: 6 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/2.5mil Inner layer W/S: 4.5/4.5mil Thickness: 1.0mm Special pr... | |
Rail Transit PCB | Huihe Circuits has extensive experience in manufacturing customized subway pcbfor customers in the railway, rail transit and automotive industries.... | |
Consumer PCB | The size, thickness and weight of products in the consumer electronics field have been greatly reduced. Via in pad PCB, blind buried vias PCB, half... | |
Consumer PCB | The size, thickness and weight of products in the consumer electronics field have been greatly reduced. Via in pad PCB, blind buried vias PCB, half... |
Same products
Electric Ebike Components & Parts | 卖方: Hangzhou Lantu Technology Co.,Ltd | Looking for premium quality spare parts for your electric bike? Look no further than Lantu Ebike.... | |
Electric Bike Motor | 卖方: Hangzhou Lantu Technology Co.,Ltd | This electric bike 750w hub motor, compatible with disc brakes, is rated at 1000W with a reductio... | |
Electric Bike Battery | 卖方: Hangzhou Lantu Technology Co.,Ltd | The electric cycle removable batterycomes with a mounting plate that attaches to most water bottl... | |
Electric Bike | 卖方: Hangzhou Lantu Technology Co.,Ltd | After 14 years of intensive cultivation, customers are absolutely assured of the quality of Lantu... | |
EEC Electric Scooter | 卖方: Hangzhou Lantu Technology Co.,Ltd | Revenge, our best-selling EEC electric scooter with EEC/COC certified and a maximum speed of 45km... |