Release Agent Tank
Function characteristic: Because the product has the high cementation performance,Website:, to prevent the product particles cementing the steel belt, so smudge the release agent on the steel belt surface, this kind of release agent is the silicone oil emulsion, is the emulsification with the water and the silicone oil molecular, smudges it on the steel belt, the main purpose is to solidify the product particles not to stick the steel belt. Working principle: This part located at the rotor drum system's underneath, composed of the release agent tank, the release agent roll, the stretching device and the control section. The lower part of the roll touch the liquid release agent, upside through the stretching device closely contact with the steel belt surface and make the reverse synchronized movement as the steel belt to make liquid release agent on steel belt surface, the blades can make the release agent smudge on the steel belt surface evener and cannot smudge excessively, so the products are quite dry.
Other supplier products
|
|
The rotating shell is a very thin sleeve. There are many small sharp nozzle holes on its outside surface,Website:, which are arranged in certain fo... |
|
|
There are drums on the tight end and drive end for each,Website:, whose diameter is 1000mm. Both sides of the drum use material Q235, with orange a... |
|
|
Production inside the stator needs to distribute uniformly,Website:, which can be completed by the metering bar. The metering bar is installed in t... |
|
|
REBO Granulator Agent (RB-4)The RB-4 Agent is a kind of emulsion containing surfactant,Website:, the product can effectively prevent the adhesion o... |
|
|
Granulator for steel belt and the difference between non-exclusive steel beltSHANGHAI REBO GRANULATOR company limited based on the principle of res... |
供应产品
Same products