Steel Beam Box Roll Forming Machine
The profile drawing of Steel Beam Box Roll Forming Machine The thickness of Material: 1.5-2.5mm Working flow: uncoiler—Leveling—Punching--roll forming--- hydraulic cut to length—output table Main Specification of Steel Beam Box Roll Forming Machine
1) Main roll forming system
Main motor power: 18.5kw
Drive: Double Chain 1.2"
Main shaft dia: ￠76mm material: 45﹟forge steel and quenched
Roller material: Gcr5 bearing steel and quench treatment 58-62,Website:, chrome coated 0.05mm
Roll station:18 groups
Raw material: 1.5mm
Working speed: 0m--15m/min(include Punching time)
Coder: Omron
PLC: YASKAWA, made in Japan. 380V 50HZ
Computer operating panel: touching screen 5) Motor punching and hydraulic cutting
Hydraulic power: 5.5KW
Material of punching mould and cutting blade: Cr12,quenched 58°-62°
Working pressure:20mpa
Punching motor: 5.5KW
Punching frequency: 50/min
Power of Servo motor: 2.2KWEquipment list: NO.ProductQuant.15T Manual uncoiler12Separate Motor punching machine13Main Roll forming(cutting, PLC computer, Hydraulic system)14Output table(Freely)2Detailed information of Steel Beam Box Roll Forming Machine Terms of payment: 30%T/T ,Balance to be paid before shipping after inspection Deliver time: 60days after get 30% down payment Warranty: 1 year warranty from date of shipment Guarantee:Photos for Steel Beam Box Roll Forming Machine: Certificates Exhibition After sales service:
1).Engineer will give free training lessons to labors in buyer’s factory.
2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved.
3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.
4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Other supplier products
|
|
|
Main specification of the hydraulic winder: Payment terms of the hydraulic winder: 30%T/T payment as deposit, 70%T/T to be paid before shipment aft... |
|
|
|
The profile drawing of C Purlin Roll Forming Machine The thickness of Material: 2.0-3.0mm Working flow: Uncoiler—Feeding—Leveling—Punching--rol... |
|
|
|
The profile drawing for reference The thickness of Material: 0.3-0.8mm Working flow: Decoiler—Feeding—Roll forming----Hydraulic stepping--hydr... |
|
|
|
Main specification of 15 ton hydraulic decoiler:
1) Capacity: 15 tons
2) Expanding Range: Φ460～Φ610mm, namely 18-24 inch.
3) size for... |
|
|
|
The profile drawing of Fire Damper Roll Forming Machine The thickness of Material: 2.0-3.0mm Working flow: Uncoiler—Feeding—Leveling—Punching--r... |
供应产品
Same products
