EPS/PU Sandwich Panel Roll Forming Machine
The features of the EPS sandwich panel roll forming machine : 1 EPS composite board is a heat insulation sandwich panel which is made of self extinguishing plastic foam to make the sandwich material. 2 The kinds of EPS sandwich panel roll forming machine : polystyrene foam sandwich panel roll forming machine, polyurethane sandwich panel roll forming machine, wool panel sandwich roll forming machine . 3 The features of the EPS sandwich roll forming machine is 3 panel into 1 panel. 4 The Color steel roof panel coating steel plate has high strength, waterproof, anti-corrosion, bright color while the advantages of the EPS sandwich panel is light weight, excellent foam insulation performance, and can withstand a certain shear. The EPS sandwich panel board for large span building roof is an ideal building material. 5 The EPS sandwich panel advatages are as below: Light weight: 10-14 kg / square meter, equivalent to the brick wall of the 1/30. Heat insulation: thermal conductivity: 0.035w/mk. High strength: can be used as retaining structure, load-bearing structure, bending resistance; general housing need not Liang Zhu. Bright color: no surface decoration, color galvanized steel plate preservation period in the 15-30. Installation of flexible and fast: construction cycle can be shortened by 40% or more oxygen index: (OI) 34 (provincial fire protection products quality inspection station) temperature limit: +120 6 The usage of the EPS sandwich panel : EPS sandwich roof panel sheet : The products are widely used in: / purification workshop condole supports, wall and purification products; / build villas, industrial plants, warehouses, with cold storage, air conditioning send wind system; / add layer of the original building housing; (large span roof panel ideal wood.Sandwich panel profiles for your reference: The EPS sandwich panel roll forming machine producing process 1 Uncoiler →Cutting →Film→Beading Roll forming2 Uncoiler →Cutting →Film→Beading→Roll forming→Rock wool delivery→Glue→Sealing side foam laminating machine with Foam,Solidify,Roll forming→Cutting →Run-out tableThe details of EPS sandwich panel roll forming machine Detailed i information:
Equipment covers :minimum of 80m (L) x 10m (W)
Production speed: up to 8m / min
Normal production speed :3-5m / min
The length of a roll laminator: 10m
Operating height: 1200mm
Factory internal height :7m (lifting height)
Air compressor :1.0m3x 2set, using a pressure of about 0.6 ~ 1MPa
Factory internal temperature :15 ℃ ~ 25 ℃
Polyurethane liquid storage tank storage temperature :20 ℃ ~ 23 ℃
Relative humidity :60 to 70%
Installed capacity : about 90KW
Voltage: 380v / 50Hz
Voltage deviation: ± 5%
Frequency :50Hz
Frequency deviation : ± 1%
Sensor voltage required : 24v DC
Lighting voltage : 220V AC control box Certificates Exhibition After sales service: 1).Engineer will give free training lessons to labors in buyer’s factory. 2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. 3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day. 4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price. 5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Other supplier products
|
|
|
Main specification of 15 ton hydraulic decoiler:
1) Capacity: 15 tons
2) Expanding Range: Φ460～Φ610mm,Website:, namely 18-24 inch.
3)... |
|
|
|
Brief Introduction of the Line Φ60High-Frequency Welded Pipe Production Line is able to produce welded pipes ofΦ17~Φ60mm in diameter and 0.7~3.0mm ... |
|
|
|
Equipment structure of the Channel Cable Tray Roll Forming Machine: Equipment structure of the Channel Cable Tray Roll Forming Machine decoiler... |
|
|
|
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output table Equipment list: NO.ProductQuant.1Manual decoiler12Mai... |
|
|
|
The profile drawing for reference The thickness of Material: 0.3-0.8mm Working flow: Decoiler—Feeding—Roll forming----Hydraulic stepping--hydraulic... |
供应产品
Same products
