EPTFE 1um For PET Two-component Non-woven Fabrics PP Needled Felt PP Woven Scrim PP Spunbond Non-woven Fabrics
Sano e-PTFE liquid filter film is a kind of hydrophilic filter film which uses ePTFE hydrophobic film by special chemical processes. So it has the features of surface filter mechanism and small pore size, high porosity, big flux. The film can bombine with any acupuncture, spunlace nonwoven material for hot-temperature compound. Therefore the product widely uses in environment filtration fields such as industrial wastewater discharge perkin, chemical and petroleum industries, and it is important for the rare metals and chemical raw material recovery.ePTFE 1um Specification ：1.Code ：SNQS-M-1um2.thickness ：20-30um3.Breadth ：260-1300mm4.Length ：100-300m5.Aperture ：1um6.Alcohol bubble point ：0.02-0.03mpa（pressure difference 0.2mpa）7.liquid flow ：6.0m³/m².hr8.PH value ：0-14Material and Application FieldMaterialDAIKIN、DONGYUE、CHENGUANGApplication FieldUrban sewage, industrial waste, chemical and other industries irrigation microfiltration.Base material manufacturerImport base material (JapanToray, Japan Unitika, Japan Hirose, Cologne Korea, the United States HV) can Thermal compounding. .weight60g/m² 、100g/m² 、120g/m² 、150g/m²、180g/m² 、200g/m² 、240 g/m² 、260g/m².FacadeFlat woven fabrics, non-woven stripes, dots nonwoven.post processingePTFEfilm mulchingSpecialityFlux large, broad applicability, good chemical compatibility, no phase change, high efficiency energy saving, no secondary pollution, filtering with high precision(0.5UM filter),resistant to ozone, high temperature
Other supplier products
|
|
|
Sano e-PTFE air purification membrane filter material uses the hot-rolled non-woven which is the well-known brand, after the surface treatment tech... |
|
|
|
ePTFE over height bubble point Specification Code：SNCGP-M-04 thickness：50-60um Width：260-1600mm Length：100-200m Pore size：0.1um Bubble point：0.25-0... |
|
|
|
Sano e-PTFE air purification membrane filter material uses the hot-rolled non-woven which is the well-known brand, after the surface treatment tech... |
|
|
|
ePTFE high bubble point Specification Code：SNGP-M-03 thickness：40-50um Width：260-1600mm Length：100-300m Pore size：0.2um Bubble point：0.14-0.1... |
|
|
|
Sano e-PTFE air removing membrane filter material used needle felt,spunlace mat or woven which is produced by the well-known brand as a carrier. It... |
供应产品
Same products
